Avaya IX™ Calling Design Sample Questions:

1. A customer Is adding a branch location, and they have an Avaya Aura core at their existing location. It is a requirement that the equipment at the new branch location continues to provide service during WAN failures.
This includes the ability for callers to leave a voicemail message by having the call route from the new location over PRI to the core location where the voicemail resides.
Assuming both locations have PRI and G450s, which Item needs to be included at the new location?

A) Survivable Core server
B) Survivable Remote server
C) Session Manager server
D) Standard Local Survivability

2. The following endpoints are being requested for an Avaya Aura solution:
* 300 9611G telephones running H.323
* 100 9641GS telephones running SIP
* 50 J129 telephones
* 50 Analog telephones
* 20 DCP telephones
* 75 Avaya Equinox clients
How many registrations will Session Manager have to support?

A) 225
B) 175
C) 100
D) 75

3. A customer has a single size with 2,500 users. They want a solution that provides hardware redundancy. The failure of a single component should not be service impacting.
Given these parameters, what would satisfy their request?

A) Communication Manager S8300
B) Communication Manager Duplex
C) Communication Manager Simplex with Survivable Core
D) Communication Manager Simplex with Survivable Remote

4. A customer with an existing Communication Manager 6 (CM) duplex solution with g4bos and isdn trunks at their main location, is adding some remote sites with G430 gateways and local ISDN trunks for survivability and local calling. They will be inter-connecting them with an MPLS network with limited bandwidth to these remote sites. They want a network design that will restrict voice traffic to a defined level with the ability to overflow to the PSTN.
What would be the minimum network region design look like?

A) One IP network region per remote location, two Intervening network regions, G.729 inter-region codec, implement Call Admission Control (CAC)
B) One IP network region per remote location, connect each remote network region directly to the main site's network region, G.729 inter-region codec, implement Call Admission Control (CAC) with Inter-gateway Alternate Routing (IGAR)
C) One IP network region per remote location, one intervening network region, G.729 inter-region codec, implement Call Admission Control (CAC) with Inter-gateway Alternate Routing (IGAR)
D) Two IP network regions per remote location, (one for the gateway, and one for the telephones), one intervening network region, G.729 inter-region codec,implement Call Admission Control (CAC) with Inter-gateway Alternate Routing (IGAR)

5. You are reviewing a design done by another engineer, and want to be sure there are enough Touch Tone Receiver (TTR) resources.
Which component of the design uses TTR resources?

A) Analog endpoints
B) SIP endpoints
C) SIP trunks
D) H.323 endpoints

Solutions: