Prepare and pass exam with our Cisco 600-212 training material, here you will achieve your dream easily With TrainingQuiz!
Last Updated: Jun 23, 2026
No. of Questions: 70 Questions & Answers with Testing Engine
Download Limit: Unlimited
Pass your exam with latest TrainingQuiz 600-212 Training Materials just one-shot. All the core contents of Cisco 600-212 exam trianing material are helpful and easy to understand, compiled and edited by the experienced experts team, which can assist you to face the difficulties with good mood and master the key knowledge easily, and then pass the Cisco 600-212 exam for sure.
TrainingQuiz has an unprecedented 99.6% first time pass rate among our customers.
We're so confident of our products that we provide no hassle product exchange.
No matter you intend to take long-term or short-term examination plane, 600-212 training materials will satisfy all your requirements. You may say that some people will pass the exam with long-term (adequate) preparation even without Cisco 600-212 quiz. However, what 600-212 study guide stress is not someone but everyone passes the exam, the 100% pass rate.
On the other side, what really reveals our ability is the short-term preparation. The absolutely high quality of 600-212 training materials can promise that you are able to clear exam within one or two day. And besides the high quality, there is two another reasons for you to choose Cisco 600-212 quiz. First, your interest languished through long-time studying which affects to your outcome directly. However, 600-212 study guide can help you avoid interest languished to guarantee high efficient study. Second, Every second counts, an inch of time is worth an inch of gold. The sooner you obtain Cisco certification, the more benefits you can get with this certification. However, 600-212 training materials can send the certification to you within the shortest time.
600-212 study guide has various versions for different requirements. First of all, it's indubitable that all versions are equipped with remarkable quality. Now what I'm going to introduce for you is APP version. It doesn't matter if you interject your study here and there; APP version of 600-212 training materials can be applied on all kinds of portable electronics that espouse it. So you can study in any leisure time with the APP version of Cisco 600-212 quiz. Rest assured there is no different in content of three versions of 600-212 study guide, so it can't exist any different examination result cause by the content.
| Exam Name | Implementing Cisco Service Provider Mobility LTE Networks |
| Duration | 90 minutes |
| Exam Code | 600-212 SPLTE |
| Sample Questions | Cisco 600-212 Sample Questions |
| Recommended Training | Implementing Cisco Service Provider Mobility LTE Networks – (SPLTE) |
| Exam Price | $300 USD |
| Number of Questions | 65-75 |
| Exam Registration | PEARSON VUE |
| Passing Score | Variable (750-850 / 1000 Approx.) |
Quality is the most essential thing of a product. With the strongest expert team, 600-212 training materials provide you the highest quality. Does not worry about anything, just reach out your hand, and just take this step, believe 600-212 study guide; you will reach your dream. Don't be anxiety, just try. You will enjoy the incredible pleasure experience that Cisco 600-212 quiz brings to you. Except the highest quality, 600-212 training materials provide the latest training material to you here and now. And the newest practice material is free for you within one year from the date of your order on.
Everyone knows the importance of Cisco Cisco Specialist certification---an internationally recognized capacity standard, especially for those who are straggling for better future. As an outstanding person, now that you understand the goal, let's look at how to implement it. A proper study guide like Cisco 600-212 Quiz is the most important groundwork for your way to the certification. As an authority in this field, 600-212 training materials can procure the certification for you safety as well as quickly. Then after Cisco certification in your hand, you are able to bask in the sun with a glass of champagne and watch those failures that choose a wrong study guide. What's more important, your new brighter future is walking towards you with 600-212 study guide.
| Section | Weight | Objectives |
|---|---|---|
| PGW (4G LTE/EHRPD) | 15% | 1 Architecture overview a) Identify key functions of the PGW and basic understanding of architecture and interfaces 2 Implement S5/S8 and Gn/Gp interface a) Describe GTP protocol b) Describe mobility management/session management call flows c) Describe QoS in EPC d) Configure S5/S8 interface with corresponding services and system parameters e) Troubleshoot S5/S8 and Gn/Gp 3 APN a) Describe the various IP address allocation mechanisms b) Describe the concept of virtual APNs c) Configure APNs and virtual APNs with corresponding service and system parameters d) Configure IP source address validation and access control list e) Troubleshoot APN 4 Implement Gx interface a) Describe the important diameter AVPs needed for Gx b) Describe basic Gx call flows c) Configure Gx interface with corresponding services and system parameters d) Troubleshoot Gx interface e) Describe the common policy use cases f) Configure failure handling modes g) Configure usage monitoring over Gx 5 Implement Gy interface a) Describe the important diameter AVPs needed for Gy b) Describe the basic Gy call flows c) Configure Gy interface with corresponding services and system parameters d) Troubleshoot Gy interface e) Configure failure handling modes f) Describe OCS selection based on static configuration g) Describe RADIUS attributes and PCRF out-of-quota redirection handling 6 Implement AAA Interface a) Describe the basic AAA authentication and accounting call flows b) Describe the important RADIUS attributes for authentication and accounting c) Configure RADIUS interface with corresponding services and system parameters d) Troubleshoot RADIUS interface 7 Implement S6b interface a) Describe the important diameter AVPs needed for S6b b) Describe the basic S6b call flows c) Configure S6b interface with corresponding services and system parameters d) Troubleshoot S6b interface 8 Interworking with non-3GPP access networks a) Configure S2a interface with corresponding services and system parameters b) Configure S2b interface with corresponding services and system parameters c) Configure S2c interface with corresponding services and system parameters d) Configure LMA functionality on a PGW e) Configure non-3GPP IRAT handovers f) Troubleshoot S2b and S2c interfaces 9 SGi Interface a) Configure and implement various IP transport types b) Configure and implement static and dynamic routing protocols |
| MME (4G LTE) | 16% | 1 Network functions LTE –MME a) Identify key functions of the MME and basic understanding of architecture and interfaces b) Describe MME states of MM and CM management c) Describe protocol stacks and procedures d) Describe mobility management signaling and call flows e) Describe session management signaling and call flows f) Describe location management signaling and call flows g0 Describe SGS procedures and signaling call flows h) Describe intra-MME handovers procedure i) Describe intra-RAT handovers procedure j) Describe inter-MME handover procedures 2 QOS architecture a) Describe the overall QOS functionality in LTE for single and multi pdn b) Describe the QOS mapping from UMTS to LTE 3 Configurations a) Configure S1 interface with corresponding services and system parameters b) Configure S6a interface with corresponding services and system parameters c) Configure S11 interface with corresponding services and system parameters d) Configure S13 interface with corresponding services and system parameters e) Identify and implement gateway selection mechanisms f) Identify and implement MME operator policy and feature sets g) Troubleshoot configurations 4 Network sharing a) Describe MOCN architecture b) Describe GWCN architecture 5 Security a) Describe LTE security principles for MME network node b) Explain security functions for mobility management procedures 6 Idle mode signaling reduction a) Identify IDLE mode signaling reduction in an LTE network b) Describe IDLE mode signaling establishment c) Describe IDLE mode signaling reduction deactivation 7 CSFB a) Describe CSFB architecture in LTE network b) Describe CSFB call flow and signaling 8 IPv6 support a) Configure IPV6 and dual stack EPS bearer scenarios b) Configure and implement transport plane IPV6 support for MME |
| LTE | 5% | 1 Describe and differentiate LTE / SAE architecture 2 Explain attach procedure and call flow |
| Other Interfaces | 5% | 1 AAA/diameter related interfaces a) Describe SWx interface b) Describe S9 interface c) Describe Sp interface 2 HRPD related interfaces a) Describe S101 b) Describe S103 |
| Lawful Intercept | 5% | 1 Describe lawful intercept architecture and events 2 Configure lawful interception 3 Describe lawful intercept trigger element |
| Voice Over LTE | 20% | 1 VoLTE application messages/protocols a) Describe VoLTE specific diameter interface b) Describe XCAP, LDAP, SPML c) Describe CAMEL, CAP, INAP, SOAP, MSML 2 Voice over LTE architecture a) Describe voice evolution in mobile network b) Identify VoLTE system architecture and functions of network elements 3 Network elements in voice over LTE a) Describe CSCF b) Describe ENUM c) Describe MNP — mobile number portability/database d) Describe telephony application server e) Describe DRA/DEA f) Describe HSS g) Describe PCRF h) Describe ATCF,ATGW i) Describe MRF j) Describe understand OSS and BSS 4 QoS a) Describe QoS in EPS b) Describe end-to-end QoS in VoLTE 5 Interfaces and signaling messages a) Configure Gx interface and signaling b) Design Rx interface and signaling c) Implement Cx interface and signaling d) Describe ISC interface and signaling e) Describe Ut interface 6 End-to-end call flow a) Describe IMS client attach to EPC b) Describe P-CSCF discovery c) Describe IMS registration, re-registration and de-registration d) Describe mobile-originated VoLTE call e) Describe mobile-terminated VoLTE call f) Describe emergency VoLTE call 7 Supplementary services a) Describe IR.92 supplementary service overview b) Describe IR.94 supplementary service overview c) Describe Important services call flows 8 VoLTE Interworking a) Describe PSTN interworking b) Describe IMS/SIP interworking c) Describe e-SRVCC |
| Management Protocols | 11% | 1 TACACS a) Describe admin authentication and command authorization methods b) Configure Local administration levels c) Configure external authentication TACACS servers 2 Performance counters/statistics a) Describe the various performance counters b) Describe the collection and processing of performance counters c) Describe the common KPIs for various MPC nodes d) Configure counters and KPIs 3 Fault management a) Describe SNMP protocols, alarms, notification and MIBs b) Configure SNMP traps, filters and thresholds 4 syslog/events Log a) Describe system log formats and filters b) Configure syslog servers and event logs 5 Security a) Describe user access control 6 NTP a) Describe system timing b) Configure NTP servers, system clock, time zone and timestamps |
| Charging | 13% | 1 Offline charging service a) Describe offline charging architecture b) Explain the GTPP protocol header and messages c) Explain charging data record transport through GTP' d) Compare and contrast GTPP transfer scenarios e) Describe and differentiate mobility records generated by MPC nodes f) Identify and list conditions for record closure and generation g) Explain Rf offline charging scenarios h) Identify and list offline charging error cases i) Configure for offline billing j) Troubleshoot for offline billing |
| SGW (4G LTE) | 10% | 1 Network functions LTE-SGW a) Identify key functions of the SGW and basic understanding of architecture and interfaces b) Describe SGW attach procedures and call flows c) Configure S1-U interface with corresponding services and system parameters d) Configure S5/S8 using PMIP/GTP interface with corresponding services and system parameters e) Configure S11 interface with corresponding services and system parameters 2 Feature functionality and extended application a) Describe multi-PDN support for SGW b) Describe downlink delay notification for SGW c) Describe idle mode signaling reduction support for SGW d) Configure and implement IPV6 support for SGW 3 Internetworking between LTE and other technologies a) Describe interaction with CDMA/eHRPD internetworking b) Describe interaction with GSM/UMTS internetworking c) Configure S4 interface with corresponding services and system parameters d) Configure S12 interface with corresponding services and system parameters e) Configure S103 interface with corresponding services and system parameters 4 Charging a) Configure Gx interface with corresponding services and system parameters 5 QoS a) Describe QoS bearer management and marking for SGW b) Configuring DSCP marking for SGW |
Hale
Jonas
Marshall
Harvey
Ken
Meredith
TrainingQuiz is the world's largest certification preparation company with 99.6% Pass Rate History from 71614+ Satisfied Customers in 148 Countries.
Over 71614+ Satisfied Customers
