[2022] Get Top-Rated Juniper JN0-362 Exam Dumps Now
Passing Key To Getting JN0-362 Certified Exam Engine PDF
What is the duration of the JN0-362 Exam
- Length of Examination: 90 minutes
- Format: Multiple choices, multiple answers
- Passing Score: 60%
- Number of Questions: 65
NEW QUESTION 26
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. R2 will be the designated router
- B. R1 will not participate in the election process
- C. R4 will be the designated router
- D. R3 will not participate in the election process
Answer: D
NEW QUESTION 27
Click the Exhibit button.
Both configuration hierarchies shown in the exhibit have been committed to your MX Series device.
Which two statements are true in this scenario? (Choose two.)
- A. The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 5
- B. Traffic destined to 10.3.0.1 will not use the R1-to-R6LSP as a next hop
- C. Traffic destined to 10.3.0.1 will use the R1-to-R6LSP as a next hop
- D. The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 7
Answer: C,D
NEW QUESTION 28
By default, which RSVP reservation style is used by the Junos OS?
- A. wildcard filter
- B. fixed explicit
- C. fixed filter
- D. shared explicit
Answer: C
NEW QUESTION 29
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. R2 will be the designated router
- B. R1 will not participate in the election process
- C. R4 will be the designated router
- D. R3 will not participate in the election process
Answer: D
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/configuring-ospf- areas.html#id-example-controlling-ospf-designated-router-election
NEW QUESTION 30
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Routes from 10.1.1.1 are less preferred than routes from 10.2.2.2
- B. Routes from 10.2.2.2 are less preferred than routes from 10.1.1.1
- C. Routes from 10.3.3.3 are less preferred than the default local preference
- D. Routes from 10.1.1.1 are less preferred than the default local preference
Answer: B
NEW QUESTION 31
The IPv6 Neighbor Discovery Protocol (NDP) performs the same function as which two IPv4 protocols? (Choose two.)
- A. DHCP
- B. ICMP
- C. DNS
- D. ARP
Answer: B,D
NEW QUESTION 32
Which two statements are true about VRRP? (Choose two.)
- A. VRRP does not require redundant REs on each member.
- B. Interfaces within the same VRRP group do not have to be on the same subnet for each member.
- C. VRRP requires redundant REs on each member.
- D. Interfaces within the same VRRP group must be on the same subnet for each member.
Answer: A,D
NEW QUESTION 33
Which two IS-IS packet types are used to maintain IS-IS database synchronization? (Choose two.)
- A. IIH
- B. CSNP
- C. LSP
- D. PSNP
Answer: B,D
NEW QUESTION 34
By default, which BGP attribute is only compared when two route advertisements are received from the same neighboring AS?
- A. Next Hop
- B. Communities
- C. AS-Path
- D. MED
Answer: D
NEW QUESTION 35
You have configured multiple IP-IP tunnels across your network to provide connectivity to remote sites.Which technique is used to help the IP endpoints in your network determine the optimal packet size to send across your tunnels?
- A. fragmentation discovery
- B. packet throughput discovery
- C. path MTU discovery
- D. end-to-end MTU discovery
Answer: C
NEW QUESTION 36
Click the exhibit.
You have configured OSPF between two routers. The OSPF adjacency will not form.
Referring to the exhibit, what is the problem?
- A. Router is not receiving hellos on the configured interface.
- B. The OSPF version does not match on the configured interfaces.
- C. The router is not sending hellos on the configured interface.
- D. The area does not match on the configured interfaces.
Answer: D
NEW QUESTION 37
Click the Exhibit button.
Referring to the exhibit, which statement about the IS-IS interface is true?
- A. The ge-0/0/0.0 interface will act as an L1 interface only
- B. The ge-0/0/0.0 interface will act as an L1/L2 interface
- C. The ge-0/0/0.0 interface will not be assigned to a level
- D. The ge-0/0/0.0 interface will act as an L2 interface only
Answer: B
NEW QUESTION 38
Click the Exhibit button. In the exhibit, three IPv6 addresses are listed. Which two statements are true? (Choose two.)
- A. The first address is complete and correct.
- B. All three addresses are the same.
- C. The third address is not formatted correctly.
- D. The second address is incomplete and not correct.
Answer: A,B
NEW QUESTION 39
What is the Junos default router priority advertisement value for IS-IS?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 40
Your customer complains that their Layer 3 VPN is not passing traffic from one site to another. You assigned that customer to VPN-A. Which command on the PE router will confirm the presence of customer routes?
- A. show route table inet.3 VPN-A
- B. show route table VPN-A.inet.0
- C. show route VPN-A table bgp.l2vpn.0
- D. show route VPN-A
Answer: B
NEW QUESTION 41
Which statement is true when using MVRP on MX Series devices?
- A. MVRP works with MSTP and VSTP, but not RSTP
- B. MVRP does not work with MSTP, RSTP, and VSTP
- C. MVRP works with MSTP and RSTP, but not VSTP
- D. MVRP works with RSTP and VSTP, but not MSTP
Answer: C
NEW QUESTION 42
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The OSPF neighbor will be declared down if BFD hello packets are not received for 5 seconds
- B. The OSPF neighbor will be declared down if three BFD hello packets are missed
- C. The OSPF neighbor will be declared down if BFD hello packets are not received for 1.5 seconds
- D. The OSPF neighbor will be declared down if 500 BFD hello packets are missed
Answer: B,C
Explanation:
Explanation
NEW QUESTION 43
You notice that a route from internal BGP peer 192.168.1.1 is missing from the local route table.Which two commands would be used to help identify the source of the problem? (Choose two.)
- A. show route receive-protocol bgp 192.168.1.1
- B. show route bgp
- C. show route advertising-protocol bgp 192.168.1.1
- D. show route protocol bgp hidden
Answer: A,D
NEW QUESTION 44
Click the Exhibit button.
You are configuring an IBGP group. When you commit your configuration, you receive the error shown in the exhibit.
Which additional configuration parameter must you add to your configuration?
- A. multipath
- B. type internal
- C. type external
- D. export <policy name>
Answer: B
NEW QUESTION 45
What are three valid BGP message types? (Choose three.)
- A. Open
- B. Keepalive
- C. Refresh
- D. Route
- E. Hello
Answer: A,B,C
NEW QUESTION 46
Click the Exhibit button.
You are asked to configure OSPF for the network? Referring to the exhibit, how should Area 1 be configured?
- A. not-so-stubby area
- B. totally stubby area
- C. stub area
- D. backbone area
Answer: C
NEW QUESTION 47
Which IPv6 extension header notifies intermediary devices that they must inspect the packet's options?
- A. fragment header
- B. routing header
- C. hop-by-hop options header
- D. destination options header
Answer: B
NEW QUESTION 48
A customer pays for the bandwidth on a per-packet basis. The network administrator wants to constrain costs and prevent Layer 2 loops on a multihomed Layer 2 WAN network.
Which technology would satisfy these requirements?
- A. Loop protection
- B. Multiple Spanning Tree Protocol
- C. Rapid Spanning Tree Protocol
- D. MPLS over GRE
Answer: A
NEW QUESTION 49
Which two characteristics describe IS-IS? (Choose two.)
- A. A collection of Level 1 routers serves as the IS-IS backbone
- B. A collection of Level 2 routers serve as the IS-IS backbone
- C. Level 2 routers connect areas in an IS-IS autonomous system
- D. A Level 1 IS routes between areas and toward other autonomous systems
Answer: B,C
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/concept/isis-levels- understanding.html
NEW QUESTION 50
Which two events could cause the BGP Active state to appear? (Choose two.)
- A. The BGP configuration is incomplete.
- B. The local router does not have a route to the peer device.
- C. A firewall is stopping all UDP packets.
- D. The local router failed to establish a TCP connection with the peer device.
Answer: A,D
NEW QUESTION 51
......
Understanding functional and technical aspects of Open Shortest Path First (OSPF)
The following will be discussed in JN0-362 exam dumps:
- Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF
- Identify the concepts, operation, or functionality of OSPF
- Additional basic options
- OSPF packet types
- OSPF area and router types
- Troubleshooting tools
- LSA packet types
- Areas, interfaces and neighbors
- Routing policy application
- Designated router and backup designated router
- Router ID
- Link-state database
Recommended Training Courses
Now, let’s focus on the recommended online course:
1. Junos Intermediate Routing (JIR)
Excelling in the Junos Intermediate Routing (JIR) course is one of the several ways to improve your chances of passing the actual exam, known as the Juniper JN0-362. This is intense training that runs for 2 days and involves hands-on labs and demonstrations to help you master everything there’s to know about Juniper routing technologies. This class provides a detailed overview of the mentioned test objectives including the features of protocol-independent routing, load balancing, high availability, IP tunneling, BGP, OSPF, and filter-based forwarding. Success in this course requires mastery of the concepts addressed by the Introduction to the Junos Operating System (IJOS) training and a background experience working with the TCP/IP and the Open Systems Interconnection (OSI) model. Also, Juniper highlights all the relevant products and technologies that will help you pass this exam including Automation, Junos OS, M Series, MX Series, PTX Series, T Series, Enterprise Routing and Switching Path, and Service Provider Routing and Switching path. In all, the course content is partitioned into several sections, depending on what the candidates will cover on specific days. Of course, the first session is all about introducing the course. Then, the focus will shift to the first 3 topics including protocol-independent routing, load balancing & filter-based forwarding, and open shortest path first. On the second day, be ready to work with the border gateway protocol, IP Tunneling, and High Availability.
JN0-362 exam questions for practice in 2022 Updated 67 Questions: https://www.trainingquiz.com/JN0-362-practice-quiz.html
