Aug 04, 2024 Reliable Study Materials for NSE6_FAZ-7.2 Exam Success For Sure
100% Latest Most updated NSE6_FAZ-7.2 Questions and Answers
Fortinet NSE6_FAZ-7.2 certification exam is designed for professionals who want to validate their skills in using FortiAnalyzer 7.2 as an administrator. FortiAnalyzer is a powerful logging, analyzing, and reporting tool that enables network administrators to identify and respond to security threats in real-time. To become a certified Fortinet NSE 6 - FortiAnalyzer 7.2 Administrator, candidates must pass the NSE6_FAZ-7.2 exam.
Fortinet NSE6_FAZ-7.2 exam covers a range of topics related to FortiAnalyzer 7.2, including its architecture, deployment, configuration, and management. NSE6_FAZ-7.2 exam also covers topics related to event management, network analysis, and report generation. Candidates will be tested on their knowledge of various FortiAnalyzer features and how to use them to analyze network traffic and security events.
NEW QUESTION # 16
Which statement is true about using aggregation mode on FortiAnalyzer?
- A. In aggregation mode, logs and content files are forwarded in real time.
- B. Aggregation mode supports log filters.
- C. Aggregation mode can be configured only on the CLI.
- D. Aggregation mode can work with syslog servers.
Answer: D
Explanation:
In aggregation mode, FortiAnalyzer stores logs received from devices and forwards them at a specified time each day to avoid duplication. It is specifically designed to work between two FortiAnalyzer units and does not support syslog or CEF servers. Additionally, aggregation mode configurations are limited to CLI commandslog-forwardandlog-forward-service.References:FortiAnalyzer 7.2 Administrator Guide,
"Aggregation" and "CLI Commands for Aggregation Mode" sections.
NEW QUESTION # 17
What areanalytics logs on FortiAnalyzer?
- A. Logs that roll over when the log file reaches a specific size
- B. Logs that are compressed and saved to a log file
- C. Logs thatare indexed and stored in the SQL
- D. Logs classified as type Traffic, or type Security
Answer: C
Explanation:
On FortiAnalyzer, analytics logs refer to the logs that have been processed, indexed, and then stored in the SQL database. This process allows for efficient data retrieval and analytics. Unlike basic log storage, which might involve simple compression and storage in a file system, analytics logs in FortiAnalyzer undergo an indexing process. This enables advanced features such as quick search, report generation, and detailed analysis, making it easier for administrators to gain insights into network activities and security incidents.References:FortiAnalyzer 7.2 Administrator Guide - "Log Management" and "Data Analytics" sections.
NEW QUESTION # 18
Which two settings must you configure on FortiAnalyzer to allow non-local administrators to authenticate on FortiAnalyzer with any user account in a single LDAP group? (Choose two.)
- A. LDAP servers IP addresses added as trusted hosts
- B. An administrator group
- C. A local wildcard administrator account
- D. One or more remote LDAP servers
Answer: B,D
Explanation:
To allow non-local administrators to authenticate on FortiAnalyzer with any user account in a single LDAP group, you must configure one or more remote LDAP servers and an administrator group. First, you configure the LDAP server(s) by specifying the server name, IP, and other details such as the Common Name Identifier and Distinguished Name. Then, you add the LDAP server to a user group. Finally, you create an administrator account that uses this user group for authentication, allowing any user from the specified LDAP group to authenticate.References:FortiAnalyzer 7.2 Administrator Guide, "Configuring remote authentication for administrators using LDAP" section.
NEW QUESTION # 19
Which items must you configure on FortiAnalyzer to send its reports to an external server?
- A. Report schedule
- B. Output profile
- C. Fabric connector
- D. Mail server
Answer: B
Explanation:
To send reports from FortiAnalyzer to an external server, you must configure the output profile. This involves specifying the method (FTP, SFTP, or SCP), server IP, username, password, and the directory where the report will be saved. Additionally, you have the option to delete the report after it has been uploaded to the server.References:FortiAnalyzer 7.2 Administrator Guide, "Enable uploading of generated reports to a server" section.
NEW QUESTION # 20
An administrator has configured the following settings:
What is the purpose of executing these commands?
- A. To record the hash value and authentication code of log files.
- B. To encrypt log transfer between FortiAnalyzer and other devices.
- C. To verify the integrity of the log files received.
- D. To create the secure channel used by the OFTP process.
Answer: C
Explanation:
The purpose of executing the provided CLI commands, which include setting thelog-checksumtomd5-auth, is to ensure the integrity of the log files. This setting is used to record the MD5 hash value of log files, which is a widely used cryptographic hash function that produces a 128-bit (16-byte) hash value. By using MD5 authentication, FortiAnalyzer ensures that the log files have not been altered or tampered with during transit, thereby verifying their integrity upon receipt.This is not related to encrypting log transfers, scheduling reports, or creating secure channels for OFTP (Over-the-FortiGate Protocol) processes.
NEW QUESTION # 21
Which two of the available registration methods place the device automatically in its assigned ADOM?
(Choose two.)
- A. Fabric Authorization
- B. Pre-shared key
- C. Request from the device
- D. Serial number
Answer: A,D
Explanation:
The registration methods that automatically place a device in its assigned ADOM are using the serial number and fabric authorization. When devices are added to FortiAnalyzer using these methods, they are automatically placed in the appropriate ADOM, which could be a defaultADOM based on the device type or a predefined ADOM based on the serial number or fabric authorization. This simplifies the management of devices and their logs by organizing them into their respective ADOMs from the moment they are registered.References:FortiAnalyzer 7.4.1 Administration Guide, "Default device type ADOMs" and
"Assigning devices to an ADOM" sections.
NEW QUESTION # 22
Which feature can you configure to add redundancy to FortiAnalyzer?
- A. Link aggregation
- B. IPv6 administrative access
- C. Primary and secondary DNS
- D. VLAN interfaces
Answer: A
Explanation:
Link aggregation is a method used to combine multiple network connections in parallel to increase throughput and provide redundancy in case one of the links fail. This feature is used in network appliances, including FortiAnalyzer, to add redundancy to the network connections, ensuring that there is a backup path for traffic if the primary path becomes unavailable.References:The FortiAnalyzer 7.4.1 Administration Guide explains the concept of link aggregation and its relevance to
NEW QUESTION # 23
What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID?
- A. Shul down FortiAnalyzer and replace the disk.
- B. There is no need to do anything because the disk will self-recover.
- C. Perform a hot swap of the disk.
- D. Run execute format disk to format and restart the FortiAnalyzer device.
Answer: C
Explanation:
In systems that support hardware RAID, hot swapping allows for the replacement of a failed disk without shutting down the system. This capability is crucial for maintaining uptime and ensuring data redundancy and availability, especially in critical environments. The RAID controller rebuilds the data on the new disk using redundancy data from the other disks in the array, ensuring no data loss and minimal impact on system performance.
In the context of a FortiAnalyzer unit equipped with hardware RAID support, the optimal approach to addressing a hard disk failure is to perform a hot swap of the disk. Hardware RAID configurations are designed to provide redundancy and fault tolerance, allowing for the replacement of a failed disk without the need to shut down the system. Hot swapping enables the administrator to replace the faulty disk with a new one while the system is still running, and the RAID controller will rebuild the data on the new disk, restoring the RAID array to its fully operational state.References:FortiAnalyzer 7.2 Administrator Guide - "Hardware Maintenance" and "RAID Management" sections.
NEW QUESTION # 24
Which two statements are true regarding fabric connectors? (Choose two.)
- A. Fabric connectors allow you to save storage costs and improve redundancy.
- B. Cloud-out connectors allow you to send real-time logs to public cloud accounts like Amazon S3.
- C. Using fabric connectors is more efficient than third-party polling information from the FortiAnalyzer API
- D. The storage connector service does not require a separate license to send logs to the cloud platform.
Answer: C,D
Explanation:
Fabric connectors in FortiAnalyzer, such as security fabric connectors (e.g., FortiClient EMS, FortiMail, FortiCASB) and storage connectors (e.g., Amazon S3, Azure Blob Container, Google Cloud Storage), provide efficient integration and data sharing capabilities. Using fabricconnectors for direct integration with FortiAnalyzer is more efficient and reliable than relying on third-party applications to poll information through the FortiAnalyzer API. Additionally, the ability to send logs to cloud storage platforms like Amazon S3, Azure Blob, and Google Cloud directly through storage connectors is a built-in feature that does not require an additional license, thus saving on storage costs and improving redundancy without incurring extra licensing fees.References:FortiAnalyzer 7.4.1 Administration Guide, "Fabric Connectors" and "Storage connectors" sections.
NEW QUESTION # 25
Which FortiAnalyzer command erases all device settings, images, databases, and logs on disk, but preserves The network configuration?
- A. executereset all-except-ip
- B. executeformatlogdisk
- C. executefactory-reset
- D. executeformat disk
Answer: C
Explanation:
The FortiAnalyzer commandexecute factory-resetis used to erase all device settings, images, databases, and logs on disk but preserves the current IP address and route information. This command effectively resets the FortiAnalyzer to its factory settings while maintaining its network configuration, allowing it to be quickly reconfigured with the same network settings.References:FortiAnalyzer 7.4.1 Administration Guide, "Reset Commands" section.
NEW QUESTION # 26
Which statement is true about ADOMs?
- A. A fabric ADOM can include all the device types supported by FortiAnalyzer.
- B. When a FortiAnalyzer Fabric is implemented, the default ADOM mode is set to advanced.
- C. You can change the ADOM mode only through the GUI.
- D. In normal mode, you cannot change the disk quota of the ADOM after its creation.
Answer: A
Explanation:
Regarding ADOMs (Administrative Domains) in FortiAnalyzer, a fabric ADOM is capable of including all device types that FortiAnalyzer supports. This is part of the flexibility offered by ADOMs to manage and report on logs from various devices within a Fortinet security fabric. ADOMs can be enabled to support non-FortiGate devices as well, and the root ADOM in Fabric ADOMs provides visibility into all Security Fabric devices. Additionally, it should be noted that in normal mode, you cannot assign different FortiGate VDOMs to different ADOMs, while in advanced mode, you can, which provides a more granular control over the log data from individual VDOMs.References:FortiAnalyzer 7.4.1 Administration Guide, "ADOMs" and
"ADOM device modes" sections.
NEW QUESTION # 27
After you have moved a registered logging device out of one ADOM and into a new ADOM, you run the following command: execute sql-local rebuild-adom <new-ADOM-name> What is the purpose of running this CLI command?
- A. To populate the new ADOM with analytical logs for the moved device, so you can run reports
- B. To remove the analytics logs of the device from the old database
- C. To migrate the archive logs to the new ADOM
- D. To reset the ADOM disk quota enforcement to its default value
Answer: A
Explanation:
When you move a registered logging device from one ADOM (Administrative Domain) to another in FortiAnalyzer, it's essential to ensure that the analytical logs for the moved device are available in the new ADOM to maintain continuity in reporting and log analysis. The commandexecute sql-local rebuild-adom < new-ADOM-name>is used specifically for this purpose. Running this command populates the new ADOM with the analytical logs of the moved device, enabling you to generate accurate and comprehensive reports based on the historical data of the device in its new ADOM context. This process ensures that the transition of devices between ADOMs does not lead to a loss of analytical insight or reporting capabilities for the device's traffic and events.
NEW QUESTION # 28
Which two statements are true regarding FortiAnalyzer system backups? (Choose two.)
- A. Existing reports can be included in the backup files.
- B. Scheduled system backups can be configured only from the CLI.
- C. Backup files can be uploaded to SCP and SFTP servers.
- D. The system reserves at least 5% to 20% disk space for backup files.
Answer: A,C
Explanation:
FortiAnalyzer allows for the inclusion of existing reports in the backup files, providing a comprehensive backup of configurations and data. Additionally, the backup files can be configured to be uploaded to SCP and SFTP servers, ensuring secure transfer and offsite storage of backup data. This can be configured both in the GUI and the CLI, providing flexibility in how backups are scheduled and managed.References:FortiAnalyzer
7.4.1 Administration Guide, "Scheduling automatic backups" section.
NEW QUESTION # 29
......
To prepare for the Fortinet NSE6_FAZ-7.2 exam, candidates should have a strong understanding of networking and security principles, as well as experience working with Fortinet products. Fortinet offers a range of training and certification resources to help candidates prepare for the exam, including online courses, instructor-led training, and study materials.
New Fortinet NSE6_FAZ-7.2 Dumps & Questions: https://www.trainingquiz.com/NSE6_FAZ-7.2-practice-quiz.html
Try with 100% Real Exam Questions and Answers: https://drive.google.com/open?id=146dsawToPuOsxJIWpHRf3yA705ir2MZq
