[Aug-2022] HPE0-J68 Exam Questions and Valid HPE0-J68 Dumps PDF
HPE0-J68 Brain Dump: A Study Guide with Tips & Tricks for passing Exam
NEW QUESTION 87
What is the typical protocol used to access data from object storage?
- A. iSCSI
- B. NVMe
- C. HTTP
- D. FC
Answer: D
NEW QUESTION 88
You are proposing a new Nimble solution to a customer that recently experienced data loss in their existing storage array.
Which features of the Nimble array should you emphasize to your customer to address their concerns? (Choose two.)
- A. deduplication
- B. triple party
- C. compression
- D. quick RAID rebuild
- E. encryption
Answer: A,C
NEW QUESTION 89
A customer need to implement a new SAN fabric for their growing environment .The new SAN should provide a high performance and port-efficient network with many-to-many connectivity .Because of changing requirement and the possible acquisition of another company in the near future. The customer cannot predit the I/O traffic pattern within the SAN .The customer also concerned about availability. Which type of SAN topology should you recommend?
- A. Core-edge fabric
- B. Single switch fabric
- C. Cascaded fabric
- D. Meshed fabric
Answer: D
NEW QUESTION 90
A customer runs their core application on an aging HPE 3PAR StoreServ 20000 Storage array. The application requires 100% availability.
Which HPE storage solution should you recommend?
- A. Nimble dHCI
- B. Primera
- C. Nimble
- D. MSA
Answer: B
NEW QUESTION 91
Match each HPE storage solution to its use case.
Answer:
Explanation:
NEW QUESTION 92
A customer asks for an integrated solution for their remote office with All-Flesh storage and ease of management. Application-aware replication to their main office is an important requirement.
Which HPE solution component should you discuss with the customer first?
- A. HPE MSA 2052 Storage
- B. HPE Nimble CS1000 system
- C. HPE SimpliVity 380
- D. HPE 3PAR StoreServ 8200
Answer: C
NEW QUESTION 93
Which value does an HPE Nimble solution provide in addition to other HPE storage solutions
- A. All inclusive software licensing over 5 years and additional capacity upgrades
- B. Flat support pricing for all hardware components
- C. Tier 1 and tier 2 phone support
- D. Upfront option for free controller upgrade after 3 years
Answer: C
NEW QUESTION 94
A customer implemented the HPE StoreEver MSL6480 Tape Library.
Which HPE Software can the system administrator use to check the health of the library and monitor its utilization?
- A. OneView
- B. StoreEver Data Verification
- C. StoreServe TapeAssure Advanced
- D. InfoSight
Answer: C
NEW QUESTION 95
A customer currently has a CS1000H and wants to upgrade to a CS3000.
What must be considered before upgrading?
- A. A capacity upgrade to a fully populated array has to be performed first.
- B. This upgrade is disruptive and needs planned downtime.
- C. Timeless storage support is not offered for CS1000H entry-level systems.
- D. A controller upgrade to a CS1000F has to be performed first.
Answer: A
NEW QUESTION 96
What is the benefit of HPE Synergy? (Choose two.)
- A. It can compose and reclaim DAS storage.
- B. It can use HPE 3PAR File Persona for object storage.
- C. It supports HPE BladeSystem c-class FlexFabric interconnect modules.
- D. It supports up to three HPE StoreVirtual VSA nodes for storage RAID.
- E. It can prevent block storage services from HPE 3PAR as part of the resource pool.
Answer: A,E
NEW QUESTION 97
Where does HPE 3PAR StoreServ Data-at-Rest Encryption occur?
- A. processor
- B. physical disk
- C. host
- D. ASIC
Answer: B
NEW QUESTION 98
What allows volume level data to be copied between an HPE 3PAR and an HPE store Virtual VSA?
- A. StoreServ Peer Motion
- B. Store virtual Peer motion
- C. Recovery Manager central
- D. HPE 3PAR Remote Copy
Answer: C
NEW QUESTION 99
A customer run several HPE 3PAR storeserv system in their environment using data rest encryption .The customer needs to add an HPE 3PAR Storeserv 8000system to the storage pool and an external key manager for all systems.. What is the requirement for this solution?
- A. Boot server for the existing 3PAR storeserv array must be replaced with self-encrypting drive
- B. Data on the existing HPE 3PAR storeserv array must be decrypted and re-encrypted with new keys
- C. HPE ESKM FIPS mode must be disabled by the administrator
- D. All drives of the new HPE 3PAR storeserv array must be self-encrypting
Answer: D
NEW QUESTION 100
You are installing an HPE 3PAR StoreServ solution and need to integrate the array with the 3rd party monitoring application customer is using.
Which technology can be configured at 3PAR to support forwarding events from the array to the customer's monitoring application?
- A. IPMI
- B. NTP
- C. SNMPv3
- D. DMI
Answer: C
NEW QUESTION 101
After a performance analysis, a customer plan to reorganize his adaptive Flash cache (AFC) configuration and want to raise it from 256 to 768GB. Which action is needed to take advantage of the new AFC configuration?
- A. Remove the old AO configuration and recreate a new one
- B. Increase current AFC configuration to reflect the additional space
- C. Remove flash cache for all VVS then run create Flash cache
- D. Run tunesys after raising the AFC to take advantage of the additional space
Answer: C
NEW QUESTION 102
A customer purchased a StoreOnce 3620 earlier in the year and has decided to add a 10GBase-T adapter to it, which the customer sourced elsewhere and installed themselves. They complain that the new adapter is not configurable.
What is the most likely reason for this issue?
- A. Secure boot must be enabled in the BIOS to securely enable HBAs
- B. The StoreOnce software requires updating
- C. The StoreOnce needs to connect to InfoSight to validate the adapter authenticity
- D. The customer failed to install a License to Use (LTU) for it
Answer: B
NEW QUESTION 103
A customer currently runs MSA 2040 SAS storage system with SFF drives. They are planning a hardware refresh. The customer is using virtual pools only, and is concerned about problematic data migration to the new platform.
How can the update to MSA2050 be performed?
- A. Peer migration license must be purchased for the offline migration
- B. Existing drives can be moved to the new system; both systems need to be online
- C. Peer migration license must be purchased for the online migration
- D. Existing drives can be moved to the new system; both systems need to be offline
Answer: A
NEW QUESTION 104
Refer to the exhibit.
A customer purchased a Primera C6S0 array to replace several older 3PAR arrays. They plan to upgrade the system as each 3PAP reaches the end of its lease. The initial sizing included 100TB effective capacity for an Oracle database environment.
The first 3PAR to come off lease has 100TB of VDI boot images that support thousands of users.
Which addition to the Primera should you recommend?
A)
B)
C)
D)
- A. Option B
- B. Option A
- C. Option C
- D. Option D
Answer: A
NEW QUESTION 105
A customer is concerned about the business risks of non-compliance for long-term data protection, retention, immutability, and encryption on petabytes of data consisting of millions of objects in a global namespace across multiple geographic locations.
Which products should you recommend to the customer to address their concern? (Choose two.)
- A. HPE StoreOnce Systems
- B. HPE Scality RING on HPE Apollo Servers
- C. HPE 3PAR StoreServ 9000
- D. HPE Complete Veeam
- E. HPE Complete iTernity iCAS
Answer: A,E
NEW QUESTION 106
Which feature enables a non-disruptive environment where host-based multi-pathing software is not affected in the event of a firmware upgrade?
- A. HPE 3PAR Persistent Cache
- B. HPE 3PAR Persistent Ports
- C. HPE 3PAR Access Guard
- D. HPE 3PAR MPIO
Answer: B
NEW QUESTION 107
Which of the following are part of the SimpliVity Data Virtualization Platform architecture? (Choose two.)
- A. Data Management Layer
- B. Presentation Layer
- C. User Management Layer
- D. Security Layer
Answer: A,B
NEW QUESTION 108
A customer has a SAN infrastructure with an HPE C-Class blade enclosure, and a mix of ProLiant G7, Gen8 and Gen9 servers. They require a new storage platform.
How can you confirm the new storage array will be supported in the existing environment?
- A. Design an array with the latest firmware, and recommend that the customer engage HPE PointNext to upgrade the existing hardware.
- B. Design an array with an older version of the firmware to ensure compatibility.
- C. Document existing server and SAN information, and consult SPOCK to ensure firmware compatibility.
- D. Check recommended firmware levels in the HP SAN Design Reference Guide to ensure firmware compatibility.
Answer: C
NEW QUESTION 109
......
HPE0-J68 Exam Questions: Free PDF Download Recently Updated Questions: https://www.trainingquiz.com/HPE0-J68-practice-quiz.html
HPE0-J68 Certification Exam Dumps with 178 Practice Test Questions: https://drive.google.com/open?id=1qy0lu1DacIgfj4eu3qd7vSfSjDXoAAMy
