CTAL_TM_001 PDF Dumps Dec 15, 2021 Exam Questions – Valid CTAL_TM_001 Dumps
Ultimate CTAL_TM_001 Guide to Prepare Free Latest ISQI Practice Tests Dumps
How to study the CTAL-TM Exam
There are two main types of resources for preparation of CTAL-TM certification exams first there are the study guides and books that are detailed and suitable for building knowledge from ground up then there are video tutorials and lectures that can somehow ease the pain of through study and are comparatively less boring for some candidates yet these demand time and concentration from the learner. Smart Candidates who want to build a solid foundation in all exam topics and related technologies usually combine video lectures with study guides to reap the benefits of both but there is one crucial preparation tool as often overlooked by most candidates the practice exams. Practice exams are built to make students comfortable with the real exam environment. Statistics have shown that most students fail not due to that preparation but due to exam anxiety the fear of the unknown. TrainingQuiz expert team recommends you to prepare some notes on these topics along with it don’t forget to practice CTAL-TM dumps which had been written by our expert team, Both these will help you a lot to clear this exam with good marks.
NEW QUESTION 38
You have been asked to write a testing strategy for the company. Which statement best explains how risk can be addressed within the testing strategy? 1 credit
- A. A test strategy is the result of a project risk analysis and defines the approach and resources for testing.
- B. A test strategy should address identified generic product risks and present a process for mitigating those risks in line with the testing policy.
- C. A test strategy is derived from the test policy and describes the way risk assessments are performed in projects.
- D. A test strategy identifies the specific product for a project risk and defines the approach for the test project.
Answer: B
NEW QUESTION 39
Given is the following defect removal chart reported at the end of system testing - showing total defects detected and closed defects (fixed and successfully retested). A number of open defects are classified as critical. All tests have been executed.
Based on the chart above, what is the most appropriate next test phase? 1 credit
- A. Another system test cycle to verify defect resolution
- B. Acceptance testing to verify the business process
- C. Acceptance testing to verify operational requirements
- D. Requirements testing as part of testing regulatory compliance
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION 40
Which of the following product risks would be most effectively addressed just by static testing? 3 credits
- A. In the delivered application, one of the countries, as specified in the requirements, has not been correctly implemented.
- B. The test cases do not cover the key requirements.
- C. The application takes too long to process a request for additional cover.
- D. The successful bidder may not deliver all the required functionality on time.
Answer: B
NEW QUESTION 41
Which THREE activities would be valid steps during the development of the test strategy?2 credits (2 out of 3 correct 1 credit)
- A. Define test career paths
- B. Identify test staff members that will be involved in the system test
- C. Issue the test strategy document for review
- D. Assess the testing that needs to be done to minimize the risks
- E. Perform a project risk analysis
- F. Define a master test plan template
- G. Understand the software development life cycle used by the software house
Answer: C,D,G
NEW QUESTION 42
Which of the following is a valid drawback of independent testing? 1 credit
- A. Independent testers need extra education and always cost more.
- B. Developers loose the sense of responsibility and independent testers may become a bottleneck.
- C. Independent testers will become a bottleneck and introduce problems in incident management.
- D. Developer and independent testing will overlap and waste resources.
Answer: B
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION 43
Identify THREE items that would be part of the work-breakdown structure showing the key testing activities for the acceptance test project. 2 credits (for 2 out of 3 correct 1 credit)
- A. Regression testing in the second, third and fourth iterations
- B. Test planning, test case preparation and test execution for each of the four iterations
- C. Defining test environment requirements for system testing
- D. Development activities for unit and integration testing
- E. Activities to deploy the system in the user environment
- F. Work should be explicitly allocated to test completion, test management, installation and to training on using the system
- G. Reviews on requirements documentation
Answer: A,B,F
NEW QUESTION 44
Model characteristics:
Which THREE of the below mentioned characteristics relate to TMMi? 1 credit
- A. Focussed on higher level testing
- B. Is build around 12 critical testing processes
- C. 20 key areas
- D. 5 maturity levels
- E. Highly related to CMMI
- F. Continuous model
- G. Staged model
- H. Focussed on component and integration testing
Answer: D,E,G
NEW QUESTION 45
Explain how the above mentioned report may differ from a report that you produce for the project manager, who is a test specialist Select TWO items from the following options that can be used to report to the project manager and would not be included in a report to senior management. 1 credit
- A. Give product risk status
- B. List of all outstanding defects with their priority and severity
- C. Show trend analysis
- D. State recommendations for release
- E. Show details on effort spent
Answer: B,E
NEW QUESTION 46
You have been given responsibility for the non-functional testing of a safety-critical monitoring & diagnostics package in the medical area. Which of the following would you least expect to see addressed in the test plan? 1 credit
- A. Reliability
- B. Safety
- C. Availability
- D. Portability
Answer: D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION 47
As part of the test strategy, entry and exit criteria will be defined for each test level. Which is NOT a valid reason for using entry and exit criteria? 1 credit
- A. Using entry and exit criteria will prevent software that is not or poorly tested from going to the next test level.
- B. Exit criteria are used to decide on when to stop testing.
- C. Entry and exit criteria are a principal way for getting adequate resources.
- D. The expectation is that development testing is not adequate.
Answer: C
NEW QUESTION 48
As a result of the RAD based development approach, the test manager has decided to change the risk mitigation approach. Which test technique might be most appropriate to use? 2 credits
- A. Boundary Value Analysis
- B. Exploratory Testing
- C. Decision Table Testing
- D. Error Guessing
Answer: B
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION 49
You are considering involving users during test execution. In general, what is the main reason for involving users during test execution? 1 credit
- A. They have good testing skills
- B. They have the ability to also focus on invalid test cases
- C. This can serve as a way to build their confidence in the system
- D. They are a cheap resource
Answer: C
NEW QUESTION 50
Comparing TMMi and TPI, which is not a valid reason for choosing either TPI or TMMi? 2 credits
- A. If the scope of test performance improvement covers all test levels, TMMi is preferred since TPI focusses mainly on black-box testing.
- B. TPI is much more a bottom-up model that is suitable for addressing test topics for a specific (test) project.
- C. If the organization is already applying CMMI, TMMi may be preferred since it has the same structure and uses the same terminology. TMMi addresses management commitment very strongly and is therefore more suitable to support a top-down improvement process.
- D. TMMi can only be used with the traditional V model,whereas TPI can be used with all types of software life cycles.
Answer: D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION 51
Select THREE issues from the options provided that should at least be raised. 1 credit
- A. Has there been sufficient comparison of tools?
- B. Is customized training available?
- C. How will the change process be managed?
- D. How will the implementation be organized?
- E. Do we have a set of tool requirements to validate the tool against?
- F. What are the problems we are trying to address?
- G. Which project will be selected to perform the tool pilot?
Answer: A,E,F
NEW QUESTION 52
You have been given responsibility for the non-functional testing of a safety-critical monitoring & diagnostics package in the medical area. Which of the following would you least expect to see addressed in the test plan? 1 credit
- A. Reliability
- B. Safety
- C. Availability
- D. Portability
Answer: D
NEW QUESTION 53
Which of the following phases in the fundamental test process is considered to deliver a document which can be used as a major input for test process improvement? 1 credit
- A. Test planning and control
- B. Test project closure
- C. Test implementation & execution
- D. Evaluating exit criteria and reporting
Answer: B
Explanation:
Topic 9, Scenario 9 "Test Management Documentation"
A software house is concerned about the number of defects found in software released to its customers. They are starting to plan a new software product. In the past, releases have often been stopped due to poor planning and too many defects found during high level testing. You have been recruited to the newly created position of test manager and asked to develop a test strategy, manage the testing of the project and organize the resources needed to carry out the testing.
NEW QUESTION 54
......
Passing Key To Getting CTAL_TM_001 Certified Exam Engine PDF: https://www.trainingquiz.com/CTAL_TM_001-practice-quiz.html
Get Top-Rated ISQI CTAL_TM_001 Exam Dumps Now: https://drive.google.com/open?id=1nK5t9g-_vvTk7Y9VnVOHfTm2VMATq325
