[Full-Version] 2023 New TrainingQuiz VCS-285 PDF Recently Updated Questions
VCS-285 Exam with Guarantee Updated 235 Questions
NEW QUESTION # 105
Which of the following is NOT a way to interact with NetBackup on appliances?
- A. Appliance Shell Menu (CLISH)
- B. Appliance API
- C. Appliance Management Server (AMS)
- D. Appliance Web Console
Answer: B
NEW QUESTION # 106
What are the different reports that are available to verify and monitor NetBackup?
- A. All of the above
- B. Storage utilization reports
- C. Backup job status reports
- D. Image integrity reports
Answer: B,C,D
NEW QUESTION # 107
What can be tuned in NetBackup using the data buffer parameters?
- A. Backup performance
- B. Backup policies
- C. Deduplication options
- D. Host Properties
Answer: A
NEW QUESTION # 108
Which supported step should an administrator perform to ensure all operating system logs are sent from an appliance to a central logging server running Linux?
- A. configure access to the appliance logs with the share open command
- B. configure a cron job on the appliance to copy the logs
- C. configure syslog forwarding in the appliance CLISH
- D. configure syslog forwarding in OpsCenter
Answer: A
NEW QUESTION # 109
Which resource should be used for analyzing and optimizing NetBackup Appliances?
- A. Veritas NetBackup Appliance Commands Reference Guide: v5.0
- B. Veritas NetBackup Deduplication Guide: v10.1
- C. Veritas NetBackup Appliance Administrator's Guide: v5.0
- D. Veritas NetBackup 10.1 Administrator's Guide, Volume I
Answer: C
NEW QUESTION # 110
A NetBackup environment with a single tape storage unit is experiencing performance issues when running full backups of a Windows file server with over a million small files. Backups for all other clients on the same network are performing adequately.
What should the administrator modify to improve performance for the client?
- A. enable Windows Change Journal
- B. modify data buffer settings for the data path
- C. enable the Use Accelerator policy attribute
- D. use Flashbackup-Windows policy type
Answer: A
NEW QUESTION # 111
A NetBackup appliance is not able to create a new backup file. What steps can be taken to troubleshoot the problem?
- A. Check the appliance's storage devices.
- B. Contact Veritas Support for assistance.
- C. Check the appliance's logs for errors.
Answer: C
NEW QUESTION # 112
What is the default value for the data-in-transit encryption setting on the primary server after an upgrade to NetBackup 10.0?
- A. Preferred On
- B. Enforced
- C. Preferred Off
- D. Automatic
Answer: C
NEW QUESTION # 113
What is the name of the feature that allows NetBackup to migrate data from Cloud Catalyst to MSDP direct cloud tiering?
- A. Cloud Conversion
- B. Cloud Transition
- C. Cloud Transformation
- D. Cloud Migration
Answer: A
NEW QUESTION # 114
How can you verify the integrity of a backup image?
- A. Use a third-party tool to verify the integrity of the image.
- B. Use the NetBackup administration console to verify the checksum of the image.
- C. Restore the image to a test system and verify that it is functional.
Answer: A,B,C
NEW QUESTION # 115
What is the default value of Federal Information Processing Standards (FIPS) mode in NetBackup?
- A. Enabled
- B. Disabled
- C. Inactive
- D. Active
Answer: D
NEW QUESTION # 116
Prior to initiating a restore, an administrator realizes that media needed for the restore was written by a server that is unavailable. The administrator does have another server that can perform the restore and that is connected to the same library.
Which two commands can the administrator perform to change the server ownership, so the restore can be performed? (Choose two.)
- A. bpmedia
- B. bpimmedia
- C. bpimport
- D. bpimage
- E. bpimagelist
Answer: A,D
NEW QUESTION # 117
Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH), under Settings > Security > Authentication, to configure and manage Network Information Service (NIS) user registration?
- A. Kerberos
- B. LocalUser
- C. LDAP
- D. ActiveDirectory
Answer: A
NEW QUESTION # 118
An administrator has a backup for client Linux1 using the LinuxClients policy complete successfully. Even though the policy Backup Selections are NOT modified, the backup job fails the next day with the following status code:
Error 71: none of the files in the file list exist.
What is a possible reason the job failed?
- A. The client was temporarily shut down.
- B. The file systems have been unmounted on the client.
- C. The client was added to another backup policy.
- D. The "Enable granular recovery" option was unset.
Answer: B
NEW QUESTION # 119
How can an administrator determine the storage and database paths for an MSDP?
- A. run the Configure Disk Storage Server wizard for the MSDP
- B. view Disk Pool > Disk volumes for the MSDP disk pool
- C. view Storage Unit > View Properties for the MSDP storage unit
- D. view Storage Server > Properties for the storage server
Answer: D
NEW QUESTION # 120
An administrator wants deduplication clients in a remote office to perform backups so less data is sent over the wide area network (WAN).
Which action should the administrator perform to reduce the total amount of data sent over the WAN?
- A. set client attributes to "Always use client-side deduplication"
- B. set the deduplication disk pool to "Limit I/O streams"
- C. enable deduplication stream handlers for the clients
- D. set client attributes to "Always use the media server"
Answer: A
NEW QUESTION # 121
Which storage unit group selection causes NetBackup to choose the least recently selected storage unit in the list as each new job is started?
- A. Failover
- B. Prioritized
- C. Round Robin
- D. Media Server Load Balancing
Answer: C
NEW QUESTION # 122
An administrator is configuring a new device and receives the following error message:
Unable to determine robot type
What are two possible solutions? (Choose two.)
- A. verify compatibility for the library with NetBackup
- B. ensure the tape drive is closed and ready for use
- C. perform a rescan of the available tape drives
- D. select the correct device type for the drives
- E. download a new device_mapping file from the Veritas Support website
Answer: A,E
NEW QUESTION # 123
Which configuration file should an administrator modify to seed the local fingerprint caching configuration on a NetBackup MSDP client?
- A. pd.conf
- B. spa.cfg
- C. agent.cfg
- D. contentrouter.cfg
Answer: A
NEW QUESTION # 124
A Windows policy protects over 100 servers using the directive ALL_LOCAL_DRIVES. The backup window for this policy is a two-hour window that is unused by any other policy. When the jobs run, each server has no more than ten paths, and the overall performance of the disk storage unit is degraded.
Which setting should the administrator modify to ensure only ten jobs write concurrently to the disk storage unit during the backup window?
- A. set the "Maximum jobs per client" host property
- B. set the "Allow multiple data streams" policy attribute
- C. enable the "Limit Jobs per policy" attribute
- D. enable multiplexing for the storage unit and set the value
Answer: C
NEW QUESTION # 125
Which of the following is NOT a function of Anomaly Detection?
- A. Initiating remediation actions
- B. Identifying potential threats
- C. Generating alerts
- D. Analyzing historical data
Answer: A
NEW QUESTION # 126
How can an administrator view the bpbrm log files on an appliance using the NetBackup Appliance Shell Menu (CLISH) interface?
- A. Support > Logs > Upload
- B. Support > Logs > Browse
- C. Support > Logs > VxLogView
- D. Support > Logs > Share
Answer: C
NEW QUESTION # 127
......
Latest VCS-285 Pass Guaranteed Exam Dumps Certification Sample Questions: https://www.trainingquiz.com/VCS-285-practice-quiz.html
VCS-285 Updated Exam Dumps [2023] Practice Valid Exam Dumps Question: https://drive.google.com/open?id=18hGwp2T6UH40QFhQUz6msNl8RAEPvMQh
