Get ready to pass the CTFL-2018 Exam right now using our ISTQB Certification Exam Package [Q19-Q36]

Share

 Get ready to pass the CTFL-2018 Exam right now using our ISTQB Certification  Exam Package

A fully updated 2021 CTFL-2018 Exam Dumps exam guide from training expert TrainingQuiz

NEW QUESTION 19
Which of the following BEST describes a Test Case?

  • A. A statement about "what to test" in terms of measurable coverage criteria from analysis of the test basis.
  • B. A description of the test objectives to be achieved and the means and the schedule for achieving them.
  • C. A set of preconditions, inputs, actions, expected results and postconditions developed based on test conditions.
  • D. A source to determine expected results to compare with the actual result of the system under test.

Answer: C

 

NEW QUESTION 20
Which of the following are product risks?
a) Failure prone software delivered.
b) Software does not perform its intended functions.
c) Insufficient staff available for testing.
d) Test environment not ready on time.
e) Poor data integrity and quality.

  • A. b, c and d.
  • B. b, d and e.
  • C. a, b and e.
  • D. b, c and e.

Answer: C

Explanation:
Explanation

 

NEW QUESTION 21
Which of the following BEST describes a methodical approach to the Error Guessing test technique?

  • A. A tester designs, implements and executes tests to cover test conditions found in checklists that are based on what is important for the user.
  • B. An experienced tester makes a list of potential defects and failures, and designs and runs tests to generate these failures should the defects be present in the code.
  • C. A tester dynamically designs and executes tests based on their knowledge, exploration of the test item and the results of previous tests.
  • D. An inexperienced tester is asked to attempt to guess errors that may have been missed by experienced testers during formal test design.

Answer: C

 

NEW QUESTION 22
Your agile project has scheduled a final sprint before release to fix and re-test all open defects with a priority level of 3 or above.
The following defect report shows the defect fields that are currently being captured on the system.
Title: Unable to add excursions to pre-paid cruises
Date raised: 21/05/18
Author: Emma Rigby
Status: Fixed
What occurred: I went to book an excursion for a pre-paid cruise but received an error message saying,
'Facility not available'. I can book excursions on cruises that have not yet been fully paid.
What should have occurred: Requirement 3.12 says clearly that customers can add excursions after cruises have been fully paid so the facility should have been available (when an additional amount may now need to be paid).
Priority: 2
Software build: 2.1
Test level: System test
Environment details: System test 3
Which of ONE of the following additional defect report fields would be MOST beneficial for the sprint team to add?

  • A. Test Script Id.
  • B. Expected results.
  • C. Severity.
  • D. Actual results.

Answer: C

 

NEW QUESTION 23
Which of the following options describe the chain of events in the correct sequence?

  • A. Fault, bug, mistake.
  • B. Mistake, failure, fault.
  • C. Failure, bug, error.
  • D. Error, fault, failure.

Answer: D

 

NEW QUESTION 24
Which statement about deriving test cases from a use case is TRUE?

  • A. There should only be one test case for each use case.
  • B. Test cases are designed to exercise the defined behaviours.
  • C. It is not possible to measure use case test coverage.
  • D. Test cases can only be derived if there is an activity diagram.

Answer: B

 

NEW QUESTION 25
You are performing a review of your colleague's test cases based on the following test basis document:

The Test Cases are as follows:
TC1. Success - valid 'User Name' and 'Password'; Customer Menu displayed TC2. Failure - 'User Name' field has blank entry; Error Number 12 displayed TC3. Failure - 'User Id' entered does not exist on database (i.e. unregistered user); Error Number 23 displayed TC4. Failure - 'Password' entered does not match user's password on database; Error Number 24 displayed You are guided by the following checklist in your review:
C1. There must be one test case to cover success
C2. There must be one test case for each error path (e.g. validation failure) C3. Each test case must use terminology consistent with the test basis document (field names, error numbering, etc.) Record a separate defect for each missing test case (checklist items C1 and C2) and for each test case that does not meet checklist item C3.
How many defects should you record?

  • A. 1.
  • B. 2.
  • C. 3.
  • D. 4.

Answer: C

 

NEW QUESTION 26
Which of the following BEST describes checklist-based testing?

  • A. An experience-based test technique whereby the experienced tester uses a high-level list of items to be noted, checked or remembered, or a set of rules or criteria against which a product has to be verified.
  • B. A test design technique which ensures that test cases are checked for consistency and completeness against an organisation's list of formatting rules and best practices.
  • C. A procedure to derive and/or select test cases based on an analysis of the specification, either functional or non-functional, of a component or system without reference to its internal structure.
  • D. An approach to testing whereby the testers dynamically design and execute tests based on their knowledge, exploration of the test item and the results of previous tests.

Answer: A

 

NEW QUESTION 27
Which of the following is a typical characteristic of the WALKTHROUGH review type?

  • A. Attendees must prepare before the meeting.
  • B. Metrics are gathered throughout.
  • C. The meeting is led by the author.
  • D. Entry and exit criteria are defined.

Answer: C

 

NEW QUESTION 28
Testing and Debugging are key activities in the software development lifecycle.
Which of the following are DEBUGGING activities?
a) Designing tests to find failures.
b) Locating the cause of failures.
c) Analysing and fixing the defects.
d) Executing tests to show failures.

  • A. a and d.
  • B. c and d.
  • C. b and c.
  • D. a and b.

Answer: D

 

NEW QUESTION 29
Which of the following are product risks?
a) Failure prone software delivered.
b) Software does not perform its intended functions.
c) Insufficient staff available for testing.
d) Test environment not ready on time.
e) Poor data integrity and quality.

  • A. b, c and d.
  • B. b, d and e.
  • C. a, b and e.
  • D. b, c and e.

Answer: C

 

NEW QUESTION 30
During which stage of the fundamental test process is the testability of requirements evaluated?

  • A. Test Design.
  • B. Test Analysis.
  • C. Test Execution.
  • D. Test Planning.

Answer: B

 

NEW QUESTION 31
Given the following state transition diagram where SS is the start state:

Which of the following answers describes a test case that only uses valid transitions to exercise all states, using the minimum number of transitions?

  • A. SS-S1-S3-S2.
  • B. SS-S3-S2-S1.
  • C. SS-S3-SS-S1-S3-S2.
  • D. SS-S1-S2-S3.

Answer: A

 

NEW QUESTION 32
You have been asked to improve the way test automation tools are being used in your company. Which one of the following is the BEST approach?

  • A. Using a keyword-driven testing approach to separate the actions and data from the tool's script.
  • B. Selecting and automating scripts that test new functionality to find the most defects.
  • C. Keeping expected results separate from the automation tool to allow the testers to check the results.
  • D. Ensuring that all data, inputs and actions are stored in the tool's script for ease of maintenance.

Answer: B

Explanation:
Explanation/Reference:

 

NEW QUESTION 33
Which of the following BEST describes how configuration management supports the test process?

  • A. It enables incidents to be tracked from discovery and classification to correction and confirmation of the solution.
  • B. It helps the test manager to decide how best to integrate and coordinate the testing activities into the software life cycle.
  • C. It enables the tester to reproduce the tested item through unique identification and version control.
  • D. It enables the tester to systematically design test conditions, cases and data.

Answer: C

 

NEW QUESTION 34
A student needs to score at least 50 points to pass. If they score at least 100 points they will achieve a merit and if they score at least 150 points they will achieve a distinction.
Which two values are in the same partition?

  • A. 55 and 120.
  • B. 50 and 60.
  • C. 45 and 170.
  • D. 45 and 55.

Answer: B

Explanation:
Explanation

 

NEW QUESTION 35
Which one of the following statements about techniques for estimating test effort is correct?

  • A. The metrics-based technique uses metrics supplied by the current test team based on their subjective feel for effort required.
  • B. The expert-based approach is based on the experience of the owners of the testing tasks or by subject matter experts.
  • C. The metrics-based technique finds the most similar former project and uses its original estimate for the current project.
  • D. In an expert-based approach, the test lead with the most years in the role is chosen to produce the estimate.

Answer: B

 

NEW QUESTION 36
......

Master 2021 Latest The Questions ISTQB Certification and Pass CTFL-2018  Real Exam!: https://www.trainingquiz.com/CTFL-2018-practice-quiz.html

Practice To CTFL-2018 - TrainingQuiz Remarkable Practice On your ISTQB Certified Tester Foundation Level 2018 Exam: https://drive.google.com/open?id=10-5by4jrojTzdnOkOikwhxA307_q4V1C