[Jul 30, 2022] Latest 300-515 PDF Dumps & Real Tests Free Updated Today
300-515 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund
Cisco 300-515 Exam Certification Details:
| Number of Questions | 55-65 |
| Recommended Training | Implementing Cisco Service Provider VPN Services (SPVI) |
| Exam Name | Implementing Cisco Service Provider VPN Services |
| Exam Code | 300-515 SPVI |
| Exam Price | $300 USD |
| Duration | 90 minutes |
NEW QUESTION 49
An engineer noticed that PE3 is failing to accept IPv6 traffic information from PE1.
The engineer confirmed that both PE3 and PE1 routers are configured accurately with IPv6 protocol.
To eliminate IPv6 traffic loss issue, which action must the engineer take to solve the problem?
- A. Configure 6PE that provides global IPv6 reachability over IPv4 MPLS
- B. Configure 6PE forwarding between 6PE routers based on the IPv6 header
- C. Allow PE routers use the MP-iBGP extensions in the IPv6 network configuration to exchange IPv6 reachability information.
- D. Disable 6PVE that provides local IPv6 reachability over MPLS.
Answer: A
NEW QUESTION 50
Refer to the exhibit. Which statement about this output is true?
- A. The zero in the second column is the normal behavior of an egress router LSR.
- B. The adjacent router is the egress LSR and has mpls ldp explicit-null configured.
- C. The router IP 192.168.1.2 sent an implicit null, and the output is from the penultimate LSR.
- D. The adjacent LSR router configured mpls label range 0.
Answer: B
NEW QUESTION 51
What is the primary function of a VRF on a router?
- A. It enables the router to support multiple separate routing tables, which allows the device to handle overlapping IP addresses.
- B. It enables the router to provide faster switching through the network by using labels to identify the input and output interfaces for neighbor routers.
- C. It enables a router to configure VLANs locally, which provides segregation between networks.
- D. It enables a router to run BGP and a distance vector routing protocol at the same time, which allows it to serve as a VPN endpoint between remote sites.
Answer: A
NEW QUESTION 52
An engineer needs to improve MPLS network management by implementing a set of tools to support the NOC engineers in troubleshooting network failures. Which feature should the engineer implement to check the connectivity of the MPLS LSP between the ingress and egress PE routers?
- A. MPLS OAM
- B. extended ping
- C. MPLS-TP
- D. LDP autodiscovery
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r5-3/mpls/configuration/guide/b-mpls-cg53x-asr9k/b-mpls-cg53x-asr9k_chapter_01000.html
NEW QUESTION 53 
Drag and drop the EVC configuration items from the left onto the correct descriptions on the right.
Answer:
Explanation:
Explanation
NEW QUESTION 54
Refer to the exhibit.
Which result occurs when PE1 learns a new MAC address and all three PEs are enabled with EVPN native?
- A. The MAC address is entered into the CAM table only if it is learned on the native VLAN.
- B. The new MAC address is sent by BGP to PE2 and PE3 as a Type 2 BGP route.
- C. A system notification is sent to the network administrator that triggers the manual configuration of the new MAC address on PE2 and PE3.
- D. The MAC address is entered into the CAM table and is classified for use on the native VLAN
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-4/lxvpn/configuration/ guide/b-l2vpn-cg-asr9000-64x/b-l2vpn-cg-asr9000-64x_chapter_01011.html
NEW QUESTION 55
Refer to the exhibit. Which statement describes the result of this configuration?
- A. R1 redistributes BGP routes into the OSPF process of VRF custabc as OIA routes.
- B. R1 mutually redistributes routes between BGP 65001 and the OSPF process of VRF custabc.
- C. R1 redistributes BGP routes into the OSPF process of VRF custabc as E1 routes.
- D. R1 redistributes BGP routes into the OSPF process of VRF custabc as E2 routes.
Answer: C
NEW QUESTION 56
Refer to the exhibit. A customer carrier running MPLS VPN wants to utilize a backbone carrier to forward traffic and exchange VPNv4 prefixes between the two customer carrier networks depicted.
Which two sets of routers must establish MP-iBGP sessions? (Choose two.)
- A. BB-PE-A and BB-P-A
- B. BB-PE-A and BB-PE-B
- C. BB-PE-A and CC-PE-B
- D. CC-PE-A and CC-PE-B
- E. CC-PE-A and CC-P-A
- F. CC-PE-A and BB-PE-A
Answer: B,D
NEW QUESTION 57
An engineer needs to improve MPLS network management by implementing a set of tools to support the NOC engineers in troubleshooting network failures. Which feature should the engineer implement to check the connectivity of the MPLS LSP between the ingress and egress PE routers?
- A. MPLS OAM
- B. extended ping
- C. MPLS-TP
- D. LDP autodiscovery
Answer: A
Explanation:
Section: VPN Architecture
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r5-3/mpls/configuration/ guide/b-mpls-cg53x-asr9k/b-mpls-cg53x-asr9k_chapter_01000.html
NEW QUESTION 58
Which statement describes the no bgp default route-target filter command?
- A. Prefixes that are received with route targets that are not imported at the PE are not accepted.
- B. Prefixes that are received with route targets and distinguisher are accepted.
- C. Prefixes that are received with route targets and distinguisher are not accepted.
- D. Prefixes that are received with route targets that are not imported at the PE are accepted.
Answer: D
NEW QUESTION 59
Refer to the exhibit.
An engineer is implementing an MPLS P2MP TE solution. Which type of router can serve as the midpoint router and the tailend router in this P2MP TE network implementation?
- A. bud
- B. headend
- C. source
- D. transit
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/mpls/mp-te-path-setup- xe-3s-asr920-book/mp-te-path-setup-xe-3s-asr920-book_chapter_01.html
NEW QUESTION 60
What do EVPN single-active and all-active have in common?
- A. They are multihoming mechanisms used for CE devices.
- B. They are default gateway redundancy options.
- C. They are both roles that a designated router can take when MPLS is used with EVPN.
- D. They are used to provide single connection from a CE device to a service provider.
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-2/lxvpn/configuration/ guide/b-l2vpn-cg-asr9000-62x/b-l2vpn-cg-asr9000-62x_chapter_01011.html
NEW QUESTION 61
A customer has two sites over an MPLS cloud with Ethernet connections and requires one STP domain to be transparent over the MPLS provider. Which label-switching technology can the provider use without getting involved in learning the customer MAC addresses?
- A. H-VPLS
- B. L2TPV3
- C. EoMPLS
- D. VPLS
Answer: C
NEW QUESTION 62
Which two BGP attributes prevent loops in a route reflector environment? (Choose two.)
- A. origin
- B. local preference
- C. originator ID
- D. AS_PATH
- E. cluster ID
Answer: C,E
Explanation:
Reference: https://www.ciscopress.com/articles/article.asp?p=2756480&seqNum=10
NEW QUESTION 63
Which two BGP attributes prevent loops in a route reflector environment? (Choose two.)
- A. origin
- B. local preference
- C. originator ID
- D. AS_PATH
- E. cluster ID
Answer: C,E
Explanation:
Reference:
https://www.ciscopress.com/articles/article.asp?p=2756480&seqNum=10
NEW QUESTION 64
While configuring the VRF Selection feature, you get an error message after typing the below statement:
Router(config)#no vrf selection source 172.16.0.0 255.255.0.0 vrf VRF1
Which action caused this message?
- A. an attempt to configure a VRF Selection table that does not exist
- B. an attempt to configure a VRF instance on an interface that already has VRF Selection configured
- C. an attempt to remove a VRF Selection entry that does not exist
- D. the entry of an inconsistent IP address and mask for VRF Selection
Answer: C
NEW QUESTION 65
Refer to the exhibit.
Which statement about this command is true?
- A. It must be configured on the PE and CE router to enable MP-BGP to send labels for CSC.
- B. It is used to set the designated router on a link using PIM-SM.
- C. It is used to set the router that will server as the root bridge for STP.
- D. It must be configured on each PE router to enable the PE routers to receive multicast traffic for this particular MVRF.
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/routers/asr1000/configuration/guide/chassis/asrswcfg/lsmmldp.html
NEW QUESTION 66
......
Who should take the Implementing Cisco Service Provider VPN Services (300-515 SPVI) Exam
People who wish to explore the power of the dynamic culture of the Cisco Learning Network to jump-start their certification and lifelong learning goals should take this exam. Those who want to get useful tools for IT training for all Cisco certifications should also get this certification. People with prior knowledge of integrating VPN services, including Layer 2, Layer 3, and IPv6, from the service provider are highly recommended to take this exam and get themselves certified from Cisco.
List of target audience for this exam:
- Network Operations Center (NOC) personnel
- Network managers
- Network administrators
- Network designers
- Network supervisors
How much Implementing Cisco Service Provider VPN Services (300-515 SPVI) Exam Cost
The cost of this exam is USD $300 but prices for Cisco examinations differ according to level and currency. Also exam vouchers can be used for discounts. To find out the cost of your test, click here and choose your country. To learn about prices and locations, visit the CCIE Lab Exam page
2022 Valid 300-515 test answers & Cisco Exam PDF: https://www.trainingquiz.com/300-515-practice-quiz.html
Pass Cisco 300-515 Exam With Practice Test Questions Dumps Bundle: https://drive.google.com/open?id=1zxctnudwZFoTkydeLeai9vkKlnwCmJqH
