Prepare Top SAP C-IBP-2111 Exam Study Guide Practice Questions Edition
Go to C-IBP-2111 Questions - Try C-IBP-2111 dumps pdf
NEW QUESTION 17
Which of the following solutions are feasible when using the time series supply optimizer? Note: There are 3 correct Answers to this question.
- A. Not respecting production capacity
- B. Not-fully satisfied demands
- C. Violation of minimum resource utilization
- D. Not adhering to maximum transport values
- E. Violation of minimum aggregated inventory values
Answer: B,C,E
NEW QUESTION 18
Which of the following key functions are supported by SAP IBP for sales and operations? Note: There are 2 correct Answers to this question.
- A. Manual creation of feasible constrained plans
- B. An advanced demand planning process
- C. Finite resource planning
- D. A basic demand planning process
Answer: C,D
NEW QUESTION 19
What does ABC/XYZ segmentation allow you to do? Note: There are 2 correct Answers to this question.
- A. Analyze forecast accuracy by product class.
- B. Identify inventory items that require closer attention.
- C. Tailor your forecast strategy and inventory optimization to segment characteristics.
- D. Assign more appropriate inventory algorithms to planning objects.
Answer: A,C
NEW QUESTION 20
What are some of the available ABC segmentation methods in IBP? Note: There are 2 correct Answers to this question.
- A. By Number of Items (Sorted Values)
- B. By Pareto Principle (Sorted and Calculated Values)
- C. By Pareto Principle (Sorted and Cumulated %)
- D. By Number of Items (Sorted Average)
Answer: A,B
NEW QUESTION 21
Which of the following can be used as inputs for inventory level optimization? Note: There are 2 correct Answers to this question.
- A. Lead time variability
- B. Lot sizes
- C. Target inventory level
- D. Reorder point
Answer: A,B
NEW QUESTION 22
Which of the following data can be tracked using a change-history-enabled key figure? Note: There are 3 correct Answers to this question.
- A. Modified date
- B. Key figure type
- C. Scenario ID
- D. Reason code
- E. Attributes
Answer: A,D,E
NEW QUESTION 23
How can you check if key figure is editable or non-editable?
- A. Using the Web-based Planning app when selecting key figures
- B. Using the Edit View and then the Edit Planning View option
- C. Using the Key Figure Calculations app
- D. Using the Analytics Advanced app when selecting key figures
Answer: A
NEW QUESTION 24
You want to display and edit data in different units of measure (UOM). Which of the following must you consider before you use UOM? Note: There are 3 correct Answers to this question.
- A. Units of measure are usually not time-dependent.
- B. Unit of measure is an attribute of a master data type, such as Product.
- C. Analytics provide the user with the option to select the target unit of measure.
- D. Units of measure are usually not time-independent.
- E. Conversion to the target unit of measure is handled by functionality of SAP IBP Excel UI
Answer: A,B,C
NEW QUESTION 25
Which SAP IBP planning operator can be run to delete planning objects in a certain version?
- A. Purge Master Data
- B. Purge Key Figure Data
- C. Purge Key Figure Data Outside Planning Area Planning Horizon
- D. Purge Non-Confirming Data
Answer: B
NEW QUESTION 26
What actions can be performed in the Advanced Dashboards application? Note: There are 3 correct Answers to this question.
- A. Link two analytics charts.
- B. Display all assigned analytics on a single UI.
- C. Organize charts.
- D. Add process templates.
- E. Rename the charts.
Answer: B,C,D
NEW QUESTION 27
What are S&OP operator (optimizer) parameters associated with demand fair share?
- A. Number of fair share segments. Maximum inventory. Additional tiering costs (default)
- B. Number of fair share segments. Additional tiering costs (default). Number of fair share segments late delivery
- C. Number of fair share segments. Maximum days of coverage. Number of fair share segments late delivery
- D. Number of fair share segments. Additional tiering costs (default). Target inventory violation cost
- E. You want to copy a custom planning area that was built during the SAP IBP implementation to model a separate process.
Answer: B
NEW QUESTION 28
Which header name displays are available in the Report Options menu of the SAP IBP Excel interface?Note:
There are 2 correct Answers to this question.
- A. Business meaning, as defined in configuration
- B. Changed member names that the user had created
- C. Caption, as defined in configuration for the default name
- D. Full unique name including the dimension and technical name
Answer: A,D
NEW QUESTION 29
Which of these conditions must be met to create a Local Member key figure?
- A. A key figure is selected in the Key Figures tab in the Microsoft Excel add-in.
- B. Activate Local Member Recognition is selected.
- C. A key figure is created in the Planning Area app.
- D. Use Excel Cell References in Report Editor is selected.
Answer: B
NEW QUESTION 30
What is a prerequisite for modeling outsourced manufacturers with production capacity?
- A. Ensure that multiple modes of transportation are set up.
- B. Model target inventory and stocks at the outsourced location.
- C. Use production lead times and offsets to manage components at the outsourced location.
- D. Model production costs for internal and external production resources to model priority.
Answer: D
NEW QUESTION 31
You are working with the inventory optimization process and you want to use a what-if analysis. What parameters are assessed by this analysis? Note: There are 2 correct Answers to this question.
- A. Number of planning combinations
- B. Changed variability
- C. Capacity consumption
- D. Service levels
Answer: B,D
NEW QUESTION 32
Which property of an attribute will allow it to be used as an attribute as a key figure?
- A. Type INTEGER
- B. Type DECIMAL
- C. Type NAVCHAR
- D. Type TIMESTAMP
Answer: B
NEW QUESTION 33
Which of the following stages can be modeled using scenarios from the S&OP planning cycle? Note:
There are 2 correct Answers to this question.
- A. Data input review for inventory
- B. Demand-supply balancing
- C. Demand sensing stage
- D. Demand review
Answer: B,D
NEW QUESTION 34
For which of the following application jobs can you enter planning filters as parameters? Note: There are
2 correct Answers to this question.
- A. Purge Non-Conforming Data
- B. Purge Key Figure Data
- C. Create Time Periods for Time Profiles
- D. Purge Master Data
Answer: B,D
NEW QUESTION 35
You have set up infinite S&OP heuristics for unconstrained planning. What must you do to model inputs as constraints? Note: There are 2 correct Answers to this question.
- A. Create product substitutions.
- B. Enter transportation lead times.
- C. Model adjusted transport receipts.
- D. Set minimum and maximum lot sizes.
Answer: B,C
NEW QUESTION 36
You have set up a planning area and data is available. You adjust the necessary time profile settings and run the consistency check. Which settings can you change and still run a successful consistency check?
Note: There are 2 correct Answers to this question.
- A. Add a new time profile level to the time profile.
- B. Change the past and future horizon of the levels in the time profile.
- C. Change the description of the attributes in the time profile.
- D. Remove an attribute assigned to the time profile level if the attribute is used in a planning level.
Answer: B,C
NEW QUESTION 37
Which of the following settings can you use in your supply planning background job triggered from Excel? Note: There are 2 correct Answers to this question.
- A. Target currency
- B. UOM to ID
- C. Type of algorithm to use
- D. Planning unit
Answer: B,C
NEW QUESTION 38
SAP is transitioning IBP customers to the new process of export/import. What are some of the features of this new process? Note: There are 2 correct Answers to this question.
- A. You can create a collection of items and export it.
- B. You can export from a planning area that is on a different release.
- C. You can move a transported item from one collection to another.
- D. You can choose to import only some of the items that were exported.
Answer: B,C
NEW QUESTION 39
You define fixing for a key figure. Which of the following functions are available for this key figure? Note:
There are 2 correct Answers to this question.
- A. Fixing is possible for system editable key figures.
- B. Fixing is possible for a certain quantity of a key figure value.
- C. Fixing is possible for manually editable key figures.
- D. Fixing is possible for a certain period, including all child values in the hierarchy.
Answer: C,D
NEW QUESTION 40
......
SAP C-IBP-2111 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
Free SAP Certified Application Associate C-IBP-2111 Exam Question: https://www.trainingquiz.com/C-IBP-2111-practice-quiz.html
