Try Free and Start Using Realistic Verified NACE-CIP2-001 Dumps Instantly
NACE-CIP2-001 Actual Questions - Instant Download 100 Questions
NACE-CIP2-001 (Coating Inspector Level 2) Certification Exam is a globally recognized certification that validates the knowledge and skills of professionals in the field of corrosion control and protective coatings. Coating Inspector Level 2 certification is offered by the National Association of Corrosion Engineers (NACE) International, which is a leading organization dedicated to promoting corrosion control and prevention through education, certification, and networking.
To become certified as a Coating Inspector Level 2, candidates must have a minimum of two years of experience in the coatings industry, as well as a thorough understanding of coating materials, surface preparation, application methods, and inspection techniques. Candidates must also pass a rigorous exam that tests their knowledge of these topics, as well as their ability to interpret and apply industry standards and specifications.
NACE-CIP2-001 (Coating Inspector Level 2) Exam is a certification program offered by the National Association of Corrosion Engineers (NACE) International. Coating Inspector Level 2 certification is designed for individuals who work in the field of corrosion prevention and control. NACE-CIP2-001 exam tests the knowledge and skills of candidates in the areas of coating inspection, surface preparation, coating application, and coating inspection equipment.
NEW QUESTION # 13
You are the NACE Coating Inspector on a tank lining project and are asked to perform a high voltage holiday test after the coating applicators have completed their final repairs. After meeting all the confined space entry permit you enter the tank and notice a very strong odor of solvent.
Your first course of action should to:
- A. Exit the tank and immediately and report the problem to the nearest safety supervisor
- B. Don your air supplied respirator and continue the testing
- C. Investigate to find the source of the odor
- D. Exit the tank and document the incident in your daily report
Answer: A
NEW QUESTION # 14
You are the NACE Inspector on a project where a stationary floating structure is being coated and you notice a self-smoothing anti-fouling coating has been specified.
This is not a good choice because:
- A. It contains biocide
- B. It doesn't contain biocide
- C. It will result in a very slippery surface
- D. The floating structure is stationary
Answer: A
NEW QUESTION # 15
Which type of pipelines collect the gas from the transmission system so utility companies can distribute the gas to end users?
- A. Gathering
- B. Midstream
- C. Distribution
- D. Transmission
Answer: C
NEW QUESTION # 16
Which concrete smoothing technique involves scrubbing a mixture of cement mortar over the concrete surface using ai cement sack, gunny sack, or sponge rubber float?
- A. Sacking
- B. Acid etching
- C. High-pressure water washing
- D. Stoning
Answer: A
NEW QUESTION # 17
In the event of a conflict between the Product Data Sheet and the Specification:
- A. The Product Data Sheet prevails
- B. It is up to the Inspector to decide which one to follow
- C. It is up to the Applicator to decide which one to follow
- D. The Specification prevails
Answer: D
NEW QUESTION # 18
Inspectors perform tests on linings that they may not perform on exterior coatings because
- A. linings protect the contents and the container.
- B. coatings are more durable than linings.
- C. linings are more durable than coatings.
- D. coatings are expected to degrade over time.
Answer: A
NEW QUESTION # 19
Centrifugal blast cleaning requires:
- A. A large volume of air to propel the abrasive
- B. Well maintained blast wheels
- C. The use of single use abrasives
- D. Very large nozzles
Answer: B
NEW QUESTION # 20
You have just your NACE CIP Level 2 certification when you are asked to supervise a team of uncertified field pipeline inspectors.
Your FIRST preferred course of action is to:
- A. Review the NACE Attestation prior to making a decision
- B. Meet with the prospective employer to scope of your role
- C. Accept assignment without hesitation
- D. Advise the prospective employer that you cannot accept the position
Answer: A
NEW QUESTION # 21
The Inspectors' goal at the Pre-Job Conference is to:
- A. Obtain a clear understanding of the Specification
- B. Discuss contractual requirements
- C. Take accurate meeting minutes for distribution
- D. Manage the meeting so it doesn't go off topic
Answer: A
NEW QUESTION # 22
Generally for safety considerations, waterjetting hose connections use
- A. an oil/water separator.
- B. filters.
- C. a long wand.
- D. a whip-lock device.
Answer: D
NEW QUESTION # 23
Individuals conducting Coating Surveys should:
- A. Always be NACE Level 3 Certified Inspectors
- B. Always be NACE or SSPC Protective coating Specialists
- C. Always be trained and experienced Coating Industry
- D. Always be experienced Specification Writers
Answer: C
NEW QUESTION # 24
When observing fabrication defects the NACE Inspector should:
- A. Require they be corrected prior to coating
- B. Consult the specification to determine how they should be treated
- C. Write an NCR and call the fabricator
- D. Stop the job immediately
Answer: B
NEW QUESTION # 25
Inspection and Test Plans are provided to:
- A. To supersede the requirements of the product data sheets
- B. Outline the inspection steps, sequencing and pass/fail criteria
- C. So the contractor has a single document to reference
- D. So the Inspector doesn't have to read the entire specification
Answer: B
NEW QUESTION # 26
All of these are advantages of using repair patches EXCEPT
- A. special tools or equipment are required.
- B. barrier to moisture and corrosion.
- C. inert to common acids, alkalis, and solvents.
- D. excellent abrasion resistance.
Answer: A
NEW QUESTION # 27
Inspector reports should always be copied to:
- A. The Contractor and Owner
- B. All parties involved in the project
- C. The Owner only
- D. Whomever the Owner identifies
Answer: D
NEW QUESTION # 28
Which product, is used in conjunction with other coatings such as FBE when the lines run through wetlands or a body of water?
- A. Concrete
- B. 2-Layet Polyethylene (PE)
- C. Coal Tar Enamel
- D. 3-Layet Polyethylene (PE)
Answer: A
NEW QUESTION # 29
Dehumidification is defined as the removal of moisture vapor from the air to
- A. lower its temperature
- B. raise its relative humidity.
- C. provide worker comfort.
- D. lower its dew point,
Answer: D
NEW QUESTION # 30
Because a NACE Level 2 Inspector has been trained in specific destructive tests, it is up to the Inspector to decide if and when a destructive test is required.
- A. False
- B. True
Answer: A
NEW QUESTION # 31
Steel shot grit contaminated with oil or grease used in a cetrifugal blast cleaning should be
- A. mixed with uncontaminated abrasive
- B. disposed of properly.
- C. washed with clean potable water prior to Use.
- D. run through the air wash separator.
Answer: B
NEW QUESTION # 32
NACE/SSPC Water Jetting standards are directly equivalent to ISO Abrasive Blast Standards:
- A. False
- B. True
Answer: A
NEW QUESTION # 33
The Concrete Repair Institute's comparators can be used to assess:
- A. Surface profile prior to coating
- B. Compressive and tensile strength prior to coating
- C. Contamination levels prior to coating
- D. Surface cleanliness prior to coating
Answer: A
NEW QUESTION # 34
Cold-applied tape
- A. is typically green or led and looks like "painted" finish.
- B. have a cross-linked polyethylene backing and a heat-activated adhesive.
- C. is polyethylene film, heat laminated, 'With an adhesive layer of butyl glue.
- D. are identifiable by its distinct colors, usually light blue, green, Or Grey.
Answer: C
NEW QUESTION # 35
When performing inspection in accordance with ASTM D 4138 the Inspector will use:
- A. A mechanical adhesion tester
- B. A set of 14 pencils of varying hardness
- C. A destructive paint inspection Tooke gauge
- D. A hardness tester
Answer: C
NEW QUESTION # 36
Pre-cleaning of work pieces will NOT remove
- A. dirt.
- B. snow, ice or water.
- C. mill scale.
- D. oil or grease.
Answer: C
NEW QUESTION # 37
......
Download Free Latest Exam NACE-CIP2-001 Certified Sample Questions: https://www.trainingquiz.com/NACE-CIP2-001-practice-quiz.html
Prepare for your exam certification with our NACE-CIP2-001 Certified NACE: https://drive.google.com/open?id=1lorvVPy1MDuK1MyTNnmDTssfLrLmkqJM
