EMC D-PST-DY-23 Exam Info and Free Practice Test | TrainingQuiz
Pass EMC D-PST-DY-23 Premium Files Test Engine pdf - Free Dumps Collection
EMC D-PST-DY-23 exam is designed for professionals who have a good understanding of data center operations, storage area networks (SAN), and Server Virtualization. D-PST-DY-23 exam tests the candidates' ability to perform the installation, configuration, and management of clustered Dell PowerStore systems using best practices. Other skills required for the exam include the deployment of Dell PowerStore solutions in multi-vendor environments and configuring the Dell PowerStore for Fibre Channel, iSCSI, and NFS/SMB protocols.
EMC D-PST-DY-23 certification exam is intended for IT professionals who have experience with Dell PowerStore Deploy 2023 systems. Candidates who pass D-PST-DY-23 exam will be able to demonstrate their knowledge and skills in deploying and managing Dell PowerStore Deploy 2023 systems. Dell PowerStore Deploy 2023 Exam certification is highly valued in the IT industry and can help IT professionals advance their careers.
NEW QUESTION # 96
What role does a NAS server play in PowerStore file provisioning?
- A. Creating virtual machines
- B. Managing object storage
- C. Allocating LUNs
- D. Hosting shared file systems
Answer: D
NEW QUESTION # 97
A PowerStore X system is being implemented using Dell EMC S5248F-ON Ethernet switching as data switches.
What is required when configuring the VLT interconnects on the data switches?
- A. Set the VLT connection to the switch default VLAN
- B. Configure the VLT MACs with a matching unique made-up address
- C. On each switch, select the switch management port MAC as the VLT MAC
- D. Assign the switch default route for the VLT traffic
Answer: B
NEW QUESTION # 98
A customer is new to PowerStore and asks if there are any differences between the A and B back-end ports.
What is the correct response?
- A. All ports on the base enclosure are output ports
- B. "A" ports are output ports and "B" ports are input ports
- C. "A" ports are input ports and "B" ports are output ports
- D. All ports on the base enclosure are input ports
Answer: B
NEW QUESTION # 99
What describes the remote replication Failover operation?
- A. It is run automatically by the replication source system in the event of a source system outage
- B. It is run automatically by the replication destination system in the event of a source system outage
- C. It is run from the replication source system by the administrator in the event of an outage on the system
- D. It is run from the replication destination system by the administrator in the event of a source system outage
Answer: D
NEW QUESTION # 100
SIMULATION
A storage administrator needs to group Volume-1 and Volume-2 for consistency. The group should have a snapshot every day that is retained for 25 hours.
Use the simulator to make this configuration change.
When you have finished continue to the next question.
Answer:
Explanation:
See the steps in Explanation
Explanation:
1. Open the simulator and log in with the default credentials: admin/Password123#.
2. SelectStorage>Volumesfrom the left menu.
3. SelectVolume-1andVolume-2from the list of volumes and clickGroup.
4. Enter a name for the volume group, such asConsistent-Group, and clickCreate.
5. SelectProtection>Protection Policiesfrom the left menu.
6. Click+ CREATEto launch the Create Protection Policy wizard.
7. Enter a name for the protection policy, such asDaily-Snapshot, and clickNext.
8. Click+ CREATEto create a new snapshot rule for the policy.
9. Enter a name for the snapshot rule, such asDaily-Rule, and clickNext.
10. SelectAll Daysfor the days to run the rule andTime of dayfor the frequency. Enter00:00as the start time and clickNext.
11. Enter25as the retention hours and clickNext.
12. Review the summary and clickFinishto create the snapshot rule.
13. ClickNextto continue the protection policy wizard.
14. Review the summary and clickFinishto create the protection policy.
15. SelectStorage>Volume Groupsfrom the left menu.
16. SelectConsistent-Groupfrom the list of volume groups and clickEdit.
17. ClickProtection Policyand selectDaily-Snapshotfrom the drop-down list. ClickSave.
18. The volume group is now configured with a protection policy that creates a snapshot every day at 00:00 and retains it for 25 hours.
NEW QUESTION # 101
In the context of PowerStore, what does the term "AppsON" refer to?
- A. Virtualized applications running directly on the storage array
- B. Application optimization software
- C. PowerStore's app store
- D. Native mobile applications
Answer: A
NEW QUESTION # 102
Which configuration item is optional during the PowerStore ICW?
- A. Fault Tolerance
- B. Default Users
- C. Support and CloudlQ
- D. Management Network
Answer: C
NEW QUESTION # 103
A PowerStore T administrator discovers that only one port on each node is active and passing traffic.
The other port is healthy and online, but total bandwidth is only half of what the customer expects.
Which two actions could resolve the issue? (Choose two.)
- A. Configure Dynamic LAG
- B. Configure LACP
- C. Configure RSTP
- D. Configure VLT
Answer: A,B
NEW QUESTION # 104
SIMULATION
Use the simulator to assign a protection policy to the virtual machine "VM1". Use the following settings:
Snapshots on Monday through Friday at 10:00 PM Eastern Time
Retention of 10 days
When you have finished, continue to the next question.
Answer:
Explanation:
See the Explanation below for complete solution
Explanation:
Navigate to the virtual machine management section where VMs are listed, usually under the "Compute" or "VM" section.
Locate "VM1" from the list of virtual machines.
Access the settings or properties of "VM1".
Look for the "Protection" or "Protection Policies" section within the VM settings.
Select the option to create a new policy or assign an existing one.
In the policy settings, configure the snapshot schedule:
Set the frequency to weekly on Monday, Tuesday, Wednesday, Thursday, and Friday.
Set the time to 10:00 PM Eastern Time.
Configure the retention period for the snapshots to be 10 days.
Save the policy and ensure it is correctly associated with "VM1".
NEW QUESTION # 105
A storage administrator has configured the addition of a VNX2 as a remote system for migration.
What is the result of this configuration?
- A. Import sessions from the VNX2 are started for all Windows host accessed LUNs
- B. PowerStore Fibre Channel initiators are register on the VNX2 system
- C. PowerStore iSCSI initiators are registered on the VNX2 system
- D. Import sessions from the VNX2 are scheduled for automatic cutover
Answer: C
NEW QUESTION # 106
An administrator receives an alert on a PowerStore Cluster with three appliances:
The appliance A1 is projected to run out of space in 8 days Capacity utilization is above 90 percent Which tools are available to assist the Administrator with a potential resolution?
- A. Space reclamation wizard
- B. Assisted Migration
- C. System Optimization
- D. Thin provision conversion wizard
Answer: B
NEW QUESTION # 107
What is the default exposed LUN0 used for?
- A. NVMe Discovery Controller
- B. vVol protocol endpoint
- C. Storage Array Controller Device
- D. Internal migration reserve LUN
Answer: C
Explanation:
LUN 0 and the Storage Array Controller Device (SACD)
In PowerStore, LUN 0 has a specific and important function: it's used for the Storage Array Controller Device (SACD).
SACD: The SACD is a virtual device that provides access to the PowerStore appliance's internal management and control functions. It's essential for tasks like: Monitoring the health and status of the array Managing and configuring storage resources Troubleshooting issues LUN 0 as the Access Point: LUN 0 serves as the access point to the SACD. It allows authorized users and management tools to communicate with the SACD and perform necessary management operations.
Why other options are incorrect:
B). vVol protocol endpoint: PowerStore uses LUNs 254 and 255 for the vVol (vSphere Virtual Volumes) protocol endpoint.
C). Internal migration reserve LUN: PowerStore doesn't use a specific LUN for internal migration reserves. Migration operations utilize the cluster network and available storage resources dynamically.
D). NVMe Discovery Controller: NVMe discovery in PowerStore doesn't rely on a dedicated LUN. It uses standard NVMe-oF discovery mechanisms over the network. Important Notes Not a Typical LUN: LUN 0 is not a standard LUN that can be used for storing data. It's a specialized LUN dedicated to the SACD.
Automatic Exposure: PowerStore exposes LUN 0 by default. You don't need to manually create or configure it.
Dell PowerStore Reference
PowerStore: Host Configuration Guide: This guide provides information about connecting hosts to PowerStore, including details about specialized LUNs like the SACD. You can find the latest version of this guide on the Dell Support site.
NEW QUESTION # 108
What are the correct steps to manually install a PowerStore license?
- A. 1. Retrieve the License key file.
2. Click the "Install License" option under "Settings" in the user interface.
3. Upload the Activation file.
4. Upload the license key file to activate the PowerStore license.
5. Export Activation file and go to Dell Software Licensing Central. - B. 1. Export Activation file and visit Dell EMC Software Licensing Central
2. Upload the license key file to activate PowerStore license
3. Click Install License option under Settings in GUI
4. Upload Activation file
5. Retrieve the License key file - C. 1. Upload Activation file
2. Click Install License option under Settings in GUI
3. Upload the license key file to activate PowerStore license
4. Export Activation file and visit Dell EMC Software Licensing Central
5. Retrieve the License key file - D. 1. Upload Activation file
2. Click Install License option under Settings in GUI
3. Upload the license key file to activate PowerStore license
4. Retrieve the License key file
5. Export Activation file and visit Dell EMC Software Licensing Central
Answer: A
NEW QUESTION # 109
What is the primary benefit of configuring remote replication for file storage resources in PowerStore?
- A. Reducing storage capacity requirements
- B. Accelerating network performance
- C. Ensuring data availability in case of site failures
- D. Simplifying authentication processes
Answer: C
NEW QUESTION # 110
What is the purpose of configuring Ethernet switching for a PowerStore system?
- A. To establish network connectivity between storage nodes
- B. To enable Wi-Fi connectivity
- C. To optimize storage capacity
- D. To manage power distribution
Answer: A
NEW QUESTION # 111
In PowerStore, what is the function of a host group?
- A. To manage access to storage resources for specific hosts
- B. To categorize different storage pools
- C. To organize user accounts
- D. To group storage nodes together
Answer: A
NEW QUESTION # 112
Refer to the exhibit.
Which SMB path is used to access the share from client side?
- A. \\nas-smb07.hmarine test\SMB-FS07\ Hmarine_Sales
- B. \\nas-smb07.hmarine.test\ Hmarine_Sales
- C. \\SMB-FS07\Hmarine_Sales
- D. \\SMB-FS07\Sales\Hmarine_Sales
Answer: B
NEW QUESTION # 113 
Use the simulator to assign a protection policy to the virtual machine "VM1". Use the following settings:
Snapshots on Monday through Friday at 10:00 PM Eastern Time
Retention of 10 days
When you have finished, continue to the next question.
Answer:
Explanation:
See the Explanation below for complete solution.
Explanation:
Navigate to the virtual machine management section where VMs are listed, usually under the "Compute" or
"VM" section.
Locate "VM1" from the list of virtual machines.
Access the settings or properties of "VM1".
Look for the "Protection" or "Protection Policies" section within the VM settings.
Select the option to create a new policy or assign an existing one.
In the policy settings, configure the snapshot schedule:
Set the frequency to weekly on Monday, Tuesday, Wednesday, Thursday, and Friday.
Set the time to 10:00 PM Eastern Time.
Configure the retention period for the snapshots to be 10 days.
Save the policy and ensure it is correctly associated with "VM1".
Reference: https://infohub.delltechnologies.com/en-US/l/dell-powerstore-manager-overview-1/protection- protection-policies-2/
NEW QUESTION # 114
What are two supported front end connectivity options for block storage access on PowerStore? (Select 2)
- A. InfiniBand
- B. RoCE
- C. NVMe
- D. RDMA
- E. iSCSI
Answer: C,E
NEW QUESTION # 115
......
The Dell PowerStore Deploy 2023 exam is a vendor-neutral certification, which means that it is not tied to any specific vendor or product. This makes it an ideal certification for IT professionals who work with a range of storage solutions and want to demonstrate their knowledge and skills in this area. D-PST-DY-23 exam is suitable for IT professionals who work in roles such as storage administrators, system administrators, and IT managers.
Updated Official licence for D-PST-DY-23 Certified by D-PST-DY-23 Dumps PDF: https://www.trainingquiz.com/D-PST-DY-23-practice-quiz.html
New 2025 Realistic D-PST-DY-23 Dumps Test Engine Exam Questions in here: https://drive.google.com/open?id=1Rii6050R-GXntPC7NVboHfGu2aEKgerM
