Oct-2021 Latest TrainingQuiz NS0-176 Exam Dumps with PDF and Exam Engine Free Updated Today!
Following are some new NS0-176 Real Exam Questions!
NEW QUESTION 78
An administrator is configuring a Flexpod Datacenter solution. The UCS service profiles will use FCoE connectivity to the NetApp cluster.
Which pool is needed to configure the vHBA templates?
- A. MAC pool
- B. WWPN pool
- C. IQN pool
- D. WWNN pool
Answer: B
NEW QUESTION 79
You have a FlexPod solution with Cisco 6296UP Fabric Interconnects. You currently have a direct-attached AFF8040 system using FCoE for storage connectivity. You would like to reconfigure the FlexPod so that the storage is connected through the upstream switches.
Using UCS Manager, which two steps would you perform to accomplish this task? (Choose two.)
- A. Configure the FI ports with the FCoE Uplink role.
- B. Using the Configure Unified Ports wizard, change the port types to FC.
- C. Using the Configure Unified Ports wizard, change the port types to Ethernet.
- D. Configure the FI ports with the Uplink role.
Answer: B,D
NEW QUESTION 80
Your company is looking for a small remote office infrastructure to deploy to your 30 remote sites. You are asked to write deployment procedures for each site. Your goal is to have each site deployed in less than a day.
Which tool will help you accomplish your goal?
- A. OnCommand Insight
- B. UCS Director
- C. OnCommand System Manager
- D. UCS Manager
Answer: B
NEW QUESTION 81
When creating local user, which two are valid user names? (Choose two)
- A. daemon
- B. somebody
- C. 0
- D. root
- E. best_user
- F. 1greatuser
Answer: B,E
NEW QUESTION 82
You are attempting to establish a cluster peer relationship between two NetApp clusters, but the peering process fails.
What is a cause for this failure?
- A. The cluster management LIF for the cluster cannot communicate with the cluster management LIF for the peer cluster.
- B. The node management LIF on each node cannot communicate with the node management LIF on each node in the peer cluster.
- C. The intercluster LIF on each node cannot communicate with the intercluster LIF on each node in the peer cluster.
- D. The cluster LIFs on each node cannot communicate with the cluster LIFs on each node in the peer cluster.
Answer: C
NEW QUESTION 83
With Clustered Data ONTAP, which three protocols are supported for host boot in a UCS stateless computing environment in the FlexPod configuration? (Choose three.)
- A. FC
- B. iFCP
- C. FCIP
- D. FCoE
- E. NFS
- F. iSCSI
- G. CIFS
Answer: A,D,F
NEW QUESTION 84
Which FlexPod management tool allows you to manage Storage Virtual Machines (SVMs) and replication relationships?
- A. OnCommand Performance Manager
- B. OnCommand Insight
- C. OnCommand Balance
- D. OnCommand System Manager
Answer: D
NEW QUESTION 85
How should the speed be configured on the Nexus 5548 port connecting to the Nexus 1100-X?
- A. Speed 1000
- B. Speed 10
- C. It should not be configured - the 5548 will auto detect the correct speed
- D. Speed 1000000
- E. Speed 1G
Answer: A
NEW QUESTION 86
A server administrator calls you complaining that an uplink on both UCS Fabric Interconnects went down. Each Fabric Interconnect has a vPC to the Nexus 500 switches.
After logging in to the switches, you notice that all vPC member ports on the secondary vPC peer switch are down. The vPC peer keepalive is still operational.
What is the problem in this scenario?
- A. The vPC peer link is down.
- B. The vPC feature is disabled.
- C. Both UCS Fabric Interconnects rebooted.
- D. A new VLAN was added to the UCS vPC member ports.
Answer: A
NEW QUESTION 87
Which statement is true for Fibre Channel QoS System Class?
- A. One can modify no-drop policy, and non FCoE traffic using natively the same class as FCoE will be remarked to 0
- B. One cannot modify no-drop policy, and non FCoE traffic using natively the same class as FCoE will not be remarked
- C. One cannot modify no-drop policy, and non FCoE traffic using natively the same class as FCoE will be remarked to 0
- D. One can modify no-drop policy, and non FCoE traffic using natively the same class as FCoE will not be remarked
Answer: C
NEW QUESTION 88
While working on a performance related issue on your FlexPod solution, you notice an unequal distribution of traffic over the physical interfaces of a four port vPC between two Nexus 5000 switches. You would prefer a more even traffic distribution.
Which command would you use to accomplish this task?
- A. ~lacp system-priority~
- B. ~port-channel load-balance ethernet~
- C. ~lacp rate fast~
- D. ~hardware multicast hw-hash~
Answer: B
NEW QUESTION 89
The NetApp Vistual Storage Console is used to set which three setting categories on ESXi hosts? (Choose three.)
- A. Adapter Settings
- B. MPIO Settings
- C. NFS Settings
- D. Logging Settings
- E. Security Settings
Answer: A,B,C
NEW QUESTION 90
Which three are true for UCS 2208XP? (Choose three)
- A. Supports 4 port port-channel toward FI 6140
- B. Supports native FC
- C. Supports FCoE
- D. Has 32 10Gb ports to each half-width slot in the chassis
- E. Works with FI 6120 and FI 6296
- F. Connects to both Fabric Interconnects for high availability
Answer: C,D,E
NEW QUESTION 91
Which is a valid connectivity option for a FlexPod?
Note some of these may also be 'valid' options outside of a FlexPod architecture but do not specifically meet FlexPod scalability and availability requirements.
- A. UCS B-Series > UCS FI > Catalyst 3750 < FAS
- B. UCS B-series > UCS FI > 2232PP FEX > Nexus 5548 < FAS
- C. UCS B-Series direct attach FAS
- D. UCS C-Series > Nexus 3048 < FAS
- E. UCS C-Series > 2232PP FEX > UCS FI > Nexus 5548 < FAS
- F. UCS B-Series > 2232PP FEX > UCS FI > Nexus 5548 < FAS
- G. UCS C-Series direct attach FAS
Answer: D,E
NEW QUESTION 92
Which two operating modes are available with the Nexus 9000 Series switches? (Choose two.)
- A. Cisco IOS EX
- B. Cisco IOS
- C. Cisco NX-OS
- D. Cisco ACI
Answer: C,D
NEW QUESTION 93
......
Resources From:
- 2021 Latest TrainingQuiz NS0-176 Exam Dumps (PDF & Exam Engine) Free Share: https://www.trainingquiz.com/NS0-176-practice-quiz.html
Free Resources from TrainingQuiz, We Devoted to Helping You 100% Pass All Exams!
